Troy-Bilt GT54 manual Electric PTO Blade Engage Knob, Cruise Control Lever, Parking Brake Lever

Page 12

Systems Indicator Monitor / Hour Meter

Battery

42.0 LCD

PTOParking Brake (Blade Engage)

LCD

Located in the center of the tractor’s console, the systems indicator monitor records, and displays on its LCD, hours of tractor operation whenever the ignition key is rotated out of the STOP position.

The Indicator Monitor will also remind the operator of maintenance intervals for changing the engine oil. The LCD will alternately flash the recorded hours, “CHG” and “OIL” for five minutes, after every 50 hours of recorded operation elapse. The maintenance interval lasts for two hours (from 50-52, 100-102, 150-152, etc.). The LCD will also flash as described above for five minutes every time the tractor’s engine has been started during this maintenance interval. Before the interval expires, change the crankcase oil level as instructed in the MAINTENANCE section of this manual.

Brake

If the Brake light illuminates when attempting to start the tractor’s engine, depress the brake pedal.

PTO (Blade Engage)

If the PTO light illuminates when attempting to start the tractor’s engine, move the PTO knob into the disengaged (OFF) position.

Oil

It is normal for the Oil light to illuminate while the engine is cranking during start-up, but if it illuminate’s during operation, while the engine is running, stop the tractor immediately and check the crankcase oil level as instructed in the MAINTENANCE section of this manual.

Battery

It is normal for the Battery light to illuminate while the engine is cranking during start-up, but if it illuminate’s during operation, while the engine is running, the battery is in need of a charge or the engine’s charging system is not generating sufficient amperage. Refer to the MAINTENANCE section of this manual for the proper battery charging procedure or have the charging system checked by an authorized Service Dealer.

Electric PTO /

Blade Engage Knob

To engage the power to the cutting deck or other (separately available) attachments, pull outward on the PTO/Blade Engage knob. Push the PTO/ Blade Engage knob inward to disengage the power to the cutting deck.

NOTE: The PTO/Blade Engage knob must be in the disengaged (OFF) position when starting the engine.

Cruise Control

Lever

The cruise control lever is located on the tractor dash

panel, below the steering wheel. Push the cruise control lever downward while traveling forward at a desired speed. While holding the lever down, release pressure from the drive pedal.

This will engage the cruise control and allow the tractor to remain at that speed without applying pressure to the drive pedal. Depress the brake pedal or the drive pedal to deactivate cruise control. Refer to page 15 for detailed instructions regarding the cruise control feature.

NOTE: Cruise control can NOT be engaged at the tractor’s fastest ground speed. If the operator should attempt to do so, the tractor will automatically decelerate to the fastest optimal mowing ground speed.

Parking Brake

Lever

To set the parking brake, fully depress

the brake pedal and

push the parking brake lever down. Hold the lever down while taking your foot off the brake pedal. Both the parking lever and the brake pedal will then stay depressed. To release the parking brake, depress the brake pedal slightly. The parking brake lever will then return to its original position.

NOTE: The parking brake must be set if the operator leaves the seat with the engine running or the engine will automatically shut off.

IMPORTANT: Always set the parking brake when leaving the tractor unattended.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operator’s Manual Table of Contents Important Safe Operation Practices General OperationSlope Operation Towing Page Slope Gauge Attaching the Battery Cables Tire PressureShipping Brace Removal Gas and Oil Fill-upSetting the Gauge Wheels and Roller Know Your Garden Tractor Ignition Switch Module Seat Adjustment LeverChoke Control Brake PedalElectric PTO Blade Engage Knob Cruise Control LeverParking Brake Lever Safety Interlock Switches Reverse Caution ModeOperating Your Garden Tractor Starting the Engine Stopping the EngineEngaging the Parking Brake Driving The TractorSetting The Cruise Control Using the Deck Lift LeverDriving On Slopes Operating the HeadlightsEngaging the PTO MowingMaking Adjustments Leveling the DeckParking Brake Adjustment Steering AdjustmentSeat Adjustment Cleaning the Engine and Deck Maintaining Your Garden TractorEngine LubricationService TiresFuse Cutting BladesBattery Cutting Deck RemovalChanging the Deck Belt OFF-SEASON Storage Troubleshooting Trouble Possible Causes Corrective ActionAttachments & Accessories AttachmentsParts List for Model GT54 Model GT54 54 2 Model GT54 Model GT54 711-1409A Model GT54 † not pictured 3010 829 Interlock Switch 45C 6710 731-3005 For Choke MANUFACTURER’S Warranty Coverage MTD LLC, P.O. BOX 361131 CLEVELAND, Ohio 44136-0019 Phone

GT54 specifications

The Troy-Bilt GT54 is a versatile lawn tractor designed to provide homeowners with a powerful and efficient means of maintaining their gardens and lawns. With an emphasis on comfort, durability, and advanced technology, the GT54 stands out in the competitive market of riding lawn mowers.

Starting with its robust engine, the GT54 is equipped with a reliable 54-inch deck powered by a high-performance engine, often a 24 HP Kohler V-Twin. This engine not only offers considerable power but also ensures smooth operation and durability, making it suitable for a variety of terrains and cutting conditions. With the capability to tackle tough weeds and thick grass, the GT54 is perfect for medium to large yards.

One of the most significant features of the GT54 is its innovative cutting system. The tractor boasts a cutting deck that allows for 5 different height adjustments, making it easy to achieve the desired grass length. The twin-blade system combined with the deck's airflow design ensures that grass clippings are efficiently dispersed, providing a clean, even cut that can enhance the health of your lawn.

Comfort is a priority with the GT54, featuring an ergonomic seat designed for extended use, which reduces fatigue during longer mowing sessions. The steering wheel is positioned for easy maneuverability, allowing users to navigate tight corners and obstacles effortlessly.

The GT54 is also equipped with various technological advancements, including a fast and responsive automatic transmission that allows for easy speed adjustments. This feature gives homeowners greater control when mowing, particularly in challenging areas. Additionally, the electric PTO (Power Take-Off) makes engaging the mower deck straightforward, simplifying the mowing process even further.

For those looking to extend the functionality of their lawn tractor, the GT54 is compatible with various attachments, such as baggers, plows, and spreaders, making it a year-round tool for landscape maintenance. Its durable steel construction ensures longevity, making the GT54 a reliable investment for landscape enthusiasts.

In summary, the Troy-Bilt GT54 combines power, versatility, and user-friendly features. With its efficient cutting system, commitment to comfort, and advanced technological elements, this lawn tractor is designed to meet the needs of homeowners seeking to maintain their outdoor spaces with ease and precision. Whether one is a casual user or a dedicated landscaper, the GT54 is equipped to handle various chores efficiently.
Top Page Image Contents