![](/images/new-backgrounds/1018197/181973x1.webp)
AXIS 8
SAFETY INSTRUCTIONS
a)Read Instructions - All the safety and operating instructions should be read before this product is connected and used.
b)Retain Instructions - The safety and operating instructions should be kept for future reference.
c)Heed Warnings - All warnings on this product and in these operating instructions should be followed.
d)Follow Instructions - All operating and other instructions should be followed.
e)Placement – place the unit in a clean dry location.
f)Water and Moisture - This product should be kept away from direct contact with liquids. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
g)Temperature- Avoid placing this product to close to any high heat sources such as radiators. Do not use this unit at temperatures below 41°F/5°C or higher than 95°F/35°C.
h)Ventilation - The appliance should be situated so that it’s location or position does not interfere with it’s proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation opening; or, placed in a
i)Power Sources - This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.
j)Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed on or against them. When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord.
k)Object and Liquid Entry - Take care that objects do not fall into and that liquids are not spilled into the inside of the mixer.
l)Cleaning – The appliance should be cleaned only as recommended by the manufacturer. Do not use chemical solvents to clean the unit.
m)
n)Damage Requiring Service - Only qualified personnel should service this product. If you have any questions about service please contact Numark at the number(s) shown on the back cover of this manual.
o)Grounding or Polarization - Precautions should be taken so that the grounding or polarization means built into the CD player is not defeated.
p)Internal/External Voltage Selectors - Internal or external voltage selector switches, if any, should only be reset and
q)Carts and Stands -The appliance should be used only with a cart or stand
that is recommended by the manufacturer of the cart or stand. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
SERVICE INSTRUCTIONS
•Disconnect power cord before servicing
•Replace critical components only with factory parts or recommended equivalents
•For AC line powered units - Before returning repaired unit to user, use an ohmmeter to measure from both AC plug blades to all exposed metallic parts. The resistance should be no more than 100,000ohms.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE ANY COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL ONLY.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of
The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance.
CAUTION
FOR USA & CANADIAN MODELS ONLY TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments.
NOTICE CONCERNING FCC REGULATIONS
This equipment generates and uses radio frequency energy and may cause interference to radio and television reception if you do not operate it in strict accordance with the procedures detailed in this OPERATING MANUAL. This unit complies with Class B computing device rules in accordance with the specifications in
a)Reposition the other unit and/or its antennae
b)Move this unit
c)Move this unit and the other unit(s) further apart
d)Plug this unit into a different AC outlet so that it is on a different circuit from the other equipment.
This note is in accordance with Section 15.838 of the FCC Rules.
This unit does not exceed the Class B limits for radio noise emission from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications.
DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK
FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM.
USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE
DOUBLE INSULATED - When servicing use only identical replacement parts
For
©2001 Numark Industries | - The Leader in DJ Technology | http://www.numark.com |
- 2 - |