INTRODUCTION
Congratulations on the purchase of your new X-PLORA V8 DAB/FM tuner.
The X-PLORA V8 is an advanced DAB/FM receiver with radio text features for FM. Its case design complements the X- V8 series components which include an Integrated amplifier and CD player all in the same convenient size.
The tuner is designed to bring DAB into the realms of hi- fidelity sound reproduction to complement the very latest technology DAB/FM receiver circuit. Great attention has been paid to internal layout, isolating each circuit section to prevent possible interaction. The result is a DAB/FM tuner which has a smoother response than previously possible with none of the “hardness” of other units.
The resultant performance achieved by this unit is among the best in the world. It has excellent signal to noise ratio, low distortion, extraordinary resolution and fine detail.
UPGRADE PATH
Early in 2007 two interesting new X-V8series products are coming.
-The TRIPLE-X170 PSU is an upgrade Power Supply Unit. It increases the power of your X-T100 to 85+85 wpc and improves its peak current. The TRIPLE-X170 PSU will power the X-T100, X-RAYV8and X-PLORAV8simultaneously. Any product connected to it will sound better.
-The X-DACV8is a super-performance Digital to Analogue Converter with a tube output. Its performance is verging on state-of-the-art and sounds extraordinary. The X-DACV8is self-powered and also has power supply outlets for the X- RAYV8 and X-PLORAV8. When the X-RAYV8is paired with the X-DACV8, what you have is a mini KW25 system (the KW25 Transport/DAC received incredible reviews which recon it’s probably the best CD player ever).
INSTALLATION
Position the X-PLORA V8 on a stable, horizontal surface where there is no risk of it being knocked, or subjected to vibration such as from loudspeakers.
AERIAL (ANTENNA)
For ease of installation, a tri-band aerial is supplied with the unit. This covers the FM, DAB II, III and L-bands and picks up sufficient signal for most domestic purposes. However, if FM stereo background noise is obtrusive, radio text is corrupted or DAB cut-out is experienced, or unit is to be used in a fringe area, a rooftop DAB and FM aerial may be required. Please contact an approved aerial contractor with good local knowledge.
The tri-band aerial is plugged into the tri-band antenna F connector at the rear of the unit, and should be securely fastened by tightening the nut.
AUDIO CONNECTIONS
Outputs: Connect your amplifier’s left and right TUNER or AUX (line level) inputs to the RCA sockets on the back panel marked as LEFT and RIGHT outputs.
If desired, the unit can also be attached to an external DAC of your choice. The unit outputs COAX and OPTICAL digital signal stream at 48kHz.
NOTE: The digital output works for DAB and FM.
POWER CONNECTION
The power lead should be connected to a Musical Fidelity power supply unit designed for this product, such as the TRIPLE-X(see your dealer for more information). The connector from this tuner mates with the 4-way socket labelled X-PLORAV8on the rear of the power supply unit. The connector should fit comfortably with a small click when properly seated. Do not force the connector.
CLEANING
Before cleaning the unit, switch off power at the mains switch and remove the mains plug from the wall socket. Clean the cabinet and remote control unit using a moist cloth. We do not advise using solvents, white spirit or thinners as they could damage the surface finish.
