TUNER SPECIFICATIONS | ||
|
|
TUNER:
DAB Specifications
Supported DAB modes:
VHF sensitivity
Band III after error correction
Adjacent Channel Selectivity
Acquisition sensitivity
Input Impedance
FM Specifications RF Frequency Range RF Sensitivity
(S+N)/N=26dB, 90MHz@22.5KHz RF Limiting Sensitivity (S+N)/N Ultimate s/n ratio
THD
Stereo Channel Separation RDS data
WHIP AERIAL:
Operating Frequency
Gain FM & Band III
Impedance
S.W.R.
Polarization
Connector
Operating temperature
Storage temperature
Length
Mechanical Fixing
CONNECTIONS:
Digital outputs
Line level outputs:
Power requirement:
Weight:
4.0 kg, | 8.8 lbs |
5.25 kg, | 11.5 lbs |
Dimensions:
219 mm, 8.6 inches
88 mm, 3.5 inches
340 mm, 13.4 inches
Standard accessories:
I, II, III, and IV VHF 174 240 MHz RF frequency range
(Measured to EN50248) | |
(Measured to EN50248) |
32 33 dBm | (Measured to EN50248) |
48 dBm | (Measured to EN5024845) |
101 dBm |
|
50Ω F type connector (to
5 µV Dev. F.mod=1 KHz
0.5 µV
63 dB (90MHz@200mV/22.5KHz Dev. Fmod=1 KHz)
0.5% (90MHz@200mV/75KHz Dev. Fmod=1 KHz)
30 dB
CENELEC EN50067 compliant
FM Band
Band III
5dBi 75Ω
<2.0:1 at res. freq. Vertical
180° swivel joint on plug with locking nut
1 optical (Toslink), 48kHz
1 S/PDIF (RCA connector), 48Hz
1 pair RCA
For use only with suitable Musical Fidelity power supply e.g.
unit only, unboxed in shipping carton
wide
high including feet deep including terminals
Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice.
| Page 13 of 14 |
Issue 3: 19th October 2006 | |
|
|