Musical Fidelity M1CDT manual Remote Control Handset, Repeat Playback, Shuffle Playback

►▐▐ also continues shuffle play.

OPERATION

REPEAT PLAYBACK

The REPEAT button on the remote control allows the repeated playback of either one track or all tracks on the disc.

By pressing the REPEAT button once, only the current track is repeated, and the display shows

If the REPEAT button is pressed a second time, “repeat disc” is displayed instead, and the entire disc is then

	PLAY	1	0:12
	repeat track
played repeatedly.
	PLAY	1	0:24
	repeat disk
Pressing REPEAT a third time cancels repeat mode.

REMOTE CONTROL HANDSET

The remote control shown below enables functions from the M1CDT to be operated from a convenient distance.

Equivalent buttons on the remote control have the same functions as those on the front panel of the unit. Other functions are only available by remote control.

As the handset uses an invisible infra-red light beam, the front edge must be pointed directly towards the receiver window at the front of the player, without visual obstruction between them.

If the range of the remote control greatly decreases, replace the batteries with new ones. Do not mix old and new batteries – two are required, size AAA, LR03 or SUM-4.

Please dispose of used batteries in accordance to local regulations.

A/B PLAYBACK

“A/B” provides the option of playing just a certain section of the disc over and over again.

Find the beginning of the required section either by listening, or using the display time as a guide. When the desired starting point is reached, press button A / B on the remote control.

The display will show

PLAY	1	0:34
repeat a-
PLAY	1	1:55

repeat a-b

When the disc has reached the end of the required section, press the A / B button again, to display

and the unit continuously plays the selected part of the disc in this case, the segment of track 1 from 34 seconds to 1 minute 55 seconds. To cancel A/B repeat mode, press A/B on the remote control.

SHUFFLE PLAYBACK

The SHUFFLE feature allows tracks on the discs to be played in random sequence rather than the normal

PLAY 1 0:34

shuffle once

consecutive order.

Tracks are also played in a different order each time the disc is restarted, or another disc loaded. This function is obtained by pressing SHUFFLE on the remote control with the unit either stopped or playing. If the M1CDT is already playing, play will continue in random order until all tracks on the disc have been played.

Pressing SHUFFLE again will put the M1CDT in continuous Shuffle mode, endlessly repeat the disk with the

PLAY 1 0:34

shuffle cont

tracks in shuffled order

Shuffle play is cancelled by pressing the SHUFFLE button a third time. The unit resumes normal play function, continuing to the end of the disc in normal order starting from wherever it was left by the previous random selection.

From pause, pressing

Power – CDT on / standby mode

Numeric Keypad

1-9 & 0 for programming tracks

CD navigation section

SEARCH ►► – forward/b through track

TRACK ▐◄◄ backwards one track

SEARCH ◄◄ backwards through track

CD Features section

SCAN – plays first 10 seconds of each track

REPEAT – repeats whole disk or selected tracks

CHECK – check pre-programmed tracks

PROGRAM – programs selection and order of tracks

STOP █ – Stop playing CD

PAUSE PLAY ▐▐ ► – stop/start CD playback

►►▌ jump to next track

A/B sets repeat start/end to repeat section of track

SHUFFLE – plays back tracks in random order

CLEAR – clears selected pre programmed track

TIME – Changes time played to time remaining

PAUSE ▐▐ – pause CD playback

PLAY ► - start CD playback

M1 CDT manual issue 2 Page 12 of 17

M1 CDT manual issue 2 Page 9 of 17