Cleaning Tine Area, Belt Replacement | White Outdoor 454 instruction

Wheel Shafts

Remove wheel assemblies and lubricate the axle shafts at least once a season.

Cleaning Tine Area

Clean the underside of the tine shield after each use. The dirt washes off the tines easier if rinsed off immediately instead of after it dries. Always towel dry the tiller afterwards and apply a light coat of oil or silicone to prevent rusting or water damage.

IMPORTANT: Never use a "pressure washer” to clean your tiller. Water can penetrate tight areas of the tiller and its chaincase and cause serious damage to the unit.

Belt Replacement

Your tiller has been engineered with a belt made of special material (Kevlar Tensile) for longer life and better performance. It should not be replaced with an off-the-shelf belt. Order all belts through you authorized service dealer.

•Disconnect and ground the spark plug wire against the engine.

•Remove the belt cover from the left side of the tiller by remove two torx screws from the top of belt cover. See Figure 8.

•Remove the hex cap nut and flat washer from the side of the belt cover and remove the self tap screw at the bottom of the front of the cover.

Torx Screws

Belt Cover

Hex Cap Nut

& Flat Washer

Self Tap Screw

Figure 8

•Remove the belt keeper bracket located behind the engine pulley by removing two hex bolts and lock washers. See Figure 9.

•Remove belt and reassemble new belt. Follow instructions in reverse order.

NOTE: Upon reassembly, make certain the belt is routed over the idler pulley and inside of belt keepers by engine pulley. See Figure 9.

Idler Pulley Rod
Engine
Pulley
Belt Keeper	Idler Bracket
Bracket

Figure 9

Off-Season Storage

If the tiller will not be used for a period longer than 30 days, the following steps should be taken to prepare the tiller for storage.

•Clean the exterior of engine and the entire tiller thoroughly. Lubricate the tiller as described in the lubrication instructions.

•We do not recommend the use of pressure washers to clean your unit. They may cause damage to electric components, spindles, pulleys, bearings or the engine. The use of pressure washers will result in shortened life and reduce serviceability.

•Refer to the engine manual for correct engine storage instructions.

•Wipe tines with oiled rag to prevent rust.

•Store tiller in a clean, dry area. Do not store next to corrosive materials, such as fertilizer.

NOTE: When storing any type of power equipment in an unventilated or metal storage shed, care should be taken to rustproof the equipment. Using a light oil or silicone, coat the equipment and especially any springs, bearings, and cables.

454 specifications

The White Outdoor 454 is a prominent player in the realm of outdoor power equipment, specifically designed to tackle the rigors of landscaping and lawn care. This robust piece of machinery combines power and efficiency, making it an ideal choice for both professional landscapers and homeowners seeking reliable performance.

At the heart of the White Outdoor 454 is a powerful engine. The machine is equipped with a reliable and efficient gas-powered engine that delivers ample horsepower, allowing it to handle a variety of tasks. The engine design emphasizes durability and longevity, ensuring that the 454 can withstand the daily demands of yard maintenance without compromising on performance.

One of the standout features of the White Outdoor 454 is its cutting system. The model is outfitted with a wide cutting deck that enables it to mow large areas quickly. The adjustable cutting heights allow users to customize their lawn care approach, providing versatility for different types of grass and terrain conditions. This feature is particularly useful for achieving a manicured look while promoting healthy grass growth.

Ergonomics have not been overlooked in the design of the White Outdoor 454. The machine boasts a comfortable seating arrangement, with an adjustable seat that caters to users of various heights. This focus on comfort significantly reduces operator fatigue during extended mowing sessions, making it easier to complete larger jobs efficiently.

In terms of technology, the White Outdoor 454 integrates modern innovations to enhance user experience. The intuitive controls are designed for ease of use, allowing even novice operators to navigate the machine without difficulty. Furthermore, advanced cutting technology ensures that grass is cut evenly and efficiently, promoting a cleaner and healthier lawn.

Safety features are also a key aspect of the White Outdoor 454. The model includes features such as blade brakes and safety switches that minimize the risk of accidents. These thoughtful design elements give users peace of mind while operating the machine, ensuring a safer mowing experience.

In summary, the White Outdoor 454 is a powerful, efficient, and user-friendly outdoor mower that caters to the needs of both professionals and gardening enthusiasts. With its robust engine, versatile cutting system, ergonomic design, and modern technological features, the White Outdoor 454 stands out as an essential tool for effective lawn care and maintenance. Whether tackling large estates or smaller gardens, this mower promises reliable performance to achieve a beautifully maintained landscape.