White Outdoor Z - 165 manual Replacing the Head Lamp Bulb, Changing the Fuse, Battery Maintenance

Page 23

REPLACING THE HEAD LAMP BULB

1.Remove the ignition key from ignition switch.

2.Detach the bottom of the rubber boot cover on the drive handles.

3.Slide the boot cover all the way up (toward the drive handles) to access the drive handle bolts.

4.Remove both bolts securing the drive handles.

5.Remove the drive handles and the rubber boot.

6.Remove the four bolts securing the retaining plate to the control tower cover.

7.Pull up on the control tower cover and slide up and over the control tower.

8.Locate the rear of the light fixture where the wire attaches. (See Figure 18)

Look Here

Light Reflector

 

 

Light Bulb

 

Connector

Figure 18

9.Remove the wire from the light bulb assembly.

10.Squeeze the tab on the connector that attaches the wire to the light bulb assembly.

11.Pull the wire from the light bulb assembly.

12.Turn the light bulb assembly counterclockwise to release it from the light fixture.

13.Carefully pull the light bulb out of the light fixture.

14.Insert the replacement light bulb into the light fixture.

15.Turn the light bulb assembly clockwise until it locks into place.

16.Carefully insert the connector into the light bulb assembly.

17.Replace the control tower cover and drive handle assemblies.

CHANGING THE FUSE

Always use the same rated fuse when replacing.

1.Open the engine compartment.

2.Locate the fuse. It can be found on the wiring harness located in a protective cover between the engine and the battery.

3.Remove the old fuse and replace with the same rated fuse.

BATTERY MAINTENANCE

All batteries are sealed and maintenance free.

CHARGING THE BATTERY

The engine is equipped with an alternator which charges the battery when tractor is operated. Under normal conditions, the battery only needs to be charged, during and after off-season storage.

23

Image 23
Contents OPERATOR’S Manual Important Read Safety Rules and Instructions CarefullyFinding Your Model Number Calling Warranty ServiceGeneral Operation Important Safe Operation PracticesChildren ServiceSlope Operation Do notSafety Labels Found On Unit Slope Gauge Controls IGNITION/LIGHT SwitchThrottle Lever Lift HandleThrottle Lever and Choke Lever Front Choke LeverParking Brake Pedal Power TAKE-OFF PTO SwitchBrake Pedal Speed Control BAR Drive HandlesSeat Adjustment Lever Indicator PanelStopping the Z-SERIES OperationBefore Operating Operating GuidelinesDriving on Slopes Starting a Flooded EngineDriving the Z-SERIES Quick Reference Chart Pushing Your Unit MowingAvoid Streaking Checking the Brake Adjustment AdjustmentsAdjusting the Mower Deck Height Adjusting the Seat PositionSteering Adjustment Adjusting Brake ForceJam Nuts Oil Check Change Capacity Type LubricationGrease Point Locations Checking Hydraulic OIL MaintenanceEngine Compartment Fuel TankDraining Hydraulic OIL Adding Hydraulic OILChanging the Fuse Battery MaintenanceCharging the Battery Replacing the Head Lamp BulbCleaning the Battery Removing the BatteryInstalling the Battery Jump Starting the BatteryLeveling the Mower Deck Mower DecksWhen either side is lower than Removing the Mower Deck Pin Bracket Mower Deck Belt Routing Installing a NEW Mower Deck Drive BeltInstalling the Mower Deck Removing a Blade Installing a BladeCutting Blade Care Removing the Drive Belt Installing a NEW Drive BeltStorage Lubrication of Mower DeckTrouble Possible Causes Corrective Action Trouble Shooting GuidePage Page Page Page Page MANUFACTURER’S Limited Warranty for

Z - 165 specifications

The White Outdoor Z - 165 is a reliable, versatile lawn mower designed for homeowners seeking efficiency and robustness in their landscaping equipment. As part of White's distinguished lineup of outdoor power tools, the Z - 165 combines cutting-edge technology with user-friendly features, making it an excellent choice for those tackling a variety of lawn care tasks.

One of the standout features of the Z - 165 is its powerful engine. Equipped with a high-performance small engine, this mower delivers consistent power and torque, ensuring that you can tackle thick grass and uneven terrain with ease. The engine is optimized for fuel efficiency, reducing operational costs and allowing for longer mowing sessions without frequent refueling.

The Z - 165 boasts a 42-inch cutting deck, which strikes a balance between maneuverability and productivity. This size is ideal for medium to large-sized yards, allowing users to cover more ground in less time. The deck is crafted from durable materials, ensuring longevity and resistance to wear and tear. Furthermore, the cutting height can be easily adjusted, enabling users to maintain their lawns at the perfect length for optimal health and appearance.

In terms of technology, the Z - 165 features an innovative dual hydrostatic drive system. This technology not only enhances maneuverability but also provides smooth and precise control over speed and direction, allowing users to navigate around obstacles and tight corners effortlessly. The ergonomic seat design offers comfort during extended use, reducing fatigue.

Safety is a priority in the design of the Z - 165. It comes equipped with features such as an automatic blade shut-off when the operator leaves the seat, ensuring that accidents are minimized. The sturdy construction of the mower also provides stability, allowing users to feel secure while operating.

Maintenance is straightforward with the Z - 165. Its design incorporates easy-access points for routine checks and servicing, making it simple for users to keep their mower in top condition. Overall, the White Outdoor Z - 165 is a powerful, efficient lawn mower that combines performance, comfort, and safety, making it an excellent investment for any homeowner looking to maintain their outdoor spaces beautifully.