Deck Care, Engine, Lubrication | White Outdoor LC-436 specification

NOTE: An unbalanced blade will cause excessive vibration when rotating at high speeds and may cause damage to the mower and/or personal injury.

•The blade can be tested by balancing it on a round shaft screwdriver. See Figure 14. Remove metal from the heavy side until it balances evenly. It is recommended that the blade always be removed from the adapter for the best test of balance.

1.Insert screw driver through hole

2.Blade should be parallel to ground

Screw

Blade

Driver

Ground

Figure 14

•Before reassembling the blade and the blade adapter to the unit, lubricate the engine crankshaft and the inner surface of the blade adapter with light oil (or engine oil). Also lubricate the bolt holes, bolts and inner surface of the nuts.

•Install the blade adapter on the crankshaft with the “star” away from the engine. Refer to Figure 13. Place the blade with the side marked bottom (or with part number) facing away from the adapter.

•Align the blade bell support over the blade with the tabs in the holes of the blade and insert the hex bolt. Tighten the hex bolt to the torque listed in the “Blade Mounting Torque” section below.

Blade Mounting Torque

Center Bolt: 450 in. lbs. min., 600 in. lbs. max.

IMPORTANT:To ensure safe operation, all nuts and bolts must be checked periodically for correct tightness.

Deck Care

NOTE: We do not recommend the use of pressure washers or garden hose to clean your unit.These may cause damage to electric components, spindles, pulleys, bearings or the engine. The use of water will shorten life of the mower and reduce its serviceability.

•The underside of the mower deck should be cleaned after each use to prevent a buildup of grass clippings, leaves, dirt or other matter. If this debris is allowed to accumulate, it will invite rust and corrosion, and may cause an uneven discharge of grass clippings at the next cutting.

•The deck may be cleaned by tilting the mower and scraping clean with a suitable tool (make certain the spark plug wire is disconnected).

Engine

•Refer to the separate engine manual.

Lubrication

(Refer to Lubrication Chart in Figure 15.)

WARNING: Always stop engine and disconnect spark plug wire before cleaning, lubricating or doing any kind of work on lawn mower.

		e
	b
u
L

Lube

		e
	b
u
L

Lube

Figure 15: Lubrication Chart

Blade Control

•Lubricate the pivot points on the blade control handle and the brake cable at least once a season with light oil. The blade control must operate freely in both directions.

Rear & Side Discharge Doors

•The torsion springs and pivot points should be lubricated periodically with light oil to prevent any rust or binding. Door must work freely.

Wheels

•The wheels require no lubrication. However, if the wheels are removed for any reason, lubricate the surface of the axle bolt and the inner surface of the wheel with light oil. Engine oil may also be used.

Engine

•Follow engine manual for instruction and schedule of lubrication.

NOTE: When tipping the unit, empty the fuel tank and keep engine spark plug side up.

LC-436 specifications

The White Outdoor LC-436 is a robust lawn mower that has made a notable impact in the outdoor power equipment market. This versatile machine is designed to meet the varying needs of lawn care enthusiasts, featuring a combination of efficiency, reliability, and user-friendly operation.

One of the main features of the White Outdoor LC-436 is its powerful engine. Equipped with a reliable four-stroke engine, it delivers dependable performance and ensures optimal cutting power. The engine enables the mower to tackle thick grass and uneven terrain with ease, making it an ideal choice for homeowners with expansive yards or challenging landscapes.

The cutting deck of the LC-436 is another highlight of its design. With a generous 21-inch cutting width, this mower can cover a large area in a shorter amount of time. The deck is crafted from high-quality materials, ensuring durability and longevity while also providing a clean cut. Users can easily adjust the cutting height to achieve their desired lawn finish, giving them complete control over their mowing experience.

The LC-436 also incorporates advanced technologies that enhance its performance and ease of use. One notable feature is the self-propulsion system, which allows users to mow with minimal physical effort. This technology is particularly beneficial for larger properties or slopes, as it provides consistent speed and reduces fatigue during long mowing sessions.

In addition to its powerful engine and cutting capabilities, the mower is designed with user comfort in mind. Ergonomically designed handles and vibration-dampening features help reduce operator strain, making it more enjoyable to use for extended periods. The mower's lightweight construction adds to its maneuverability, allowing users to navigate tight corners and garden beds effortlessly.

Fuel efficiency is another characteristic that sets the White Outdoor LC-436 apart from its competitors. The four-stroke engine is engineered for optimal fuel consumption, enabling users to mow their lawns without excessive fuel costs, thereby providing an economical choice for regular maintenance.

In summary, the White Outdoor LC-436 stands out as a high-performing lawn mower, complete with a powerful engine, adjustable cutting deck, and user-friendly features designed for comfort and efficiency. Its blend of innovative technologies and robust construction makes it a reliable choice for homeowners seeking a dependable solution for maintaining their outdoor spaces. Whether it’s for occasional use or routine lawn care, the LC-436 is engineered to deliver a superior mowing experience.