LIFT HANDLE
Height Positions
1 through 7 and L (lock)
Button
7
6
5
4
3
2
1
L
Figure 5
The lift handle is located on the right fender. It raises and lowers the cutting height of the mower deck used by the
•1 through 7 (1 - lowest height, 7 - highest height)
•L is the lock out position. The lock position is used when removing the mower deck.
THROTTLE LEVER AND CHOKE LEVER
| FRONT |
Throttle Lever | ON |
| Choke |
| Lever |
| Fast |
Left Control | OFF |
Panel |
Figure 6
CHOKE LEVER
The choke lever is located on the left control panel. (See Figure 6) The choke lever is operated manually. Having the choke lever in the ON position helps the engine to start during initial or cold engine
•ON: Push the lever forward (toward the front of the tractor).
•OFF: Pull the lever back (toward the rear of the tractor).
THROTTLE LEVER
The throttle lever is also located on the left control panel and it is used to regulate the engine speed.
(See Figure 6) To get maximum efficiency from cutting, the throttle should be in the FAST position when operating the mower.
•FASTER ENGINE SPEED: Push the throttle lever forward toward the rabbit symbol.
•SLOWER ENGINE SPEED: Pull the throttle lever back toward turtle symbol.
8