White Outdoor 606 manual Starting the Engine, Stopping the Engine, Driving The Tractor

Page 17

WARNING: Keep hands and feet away from the discharge opening of the cutting deck.

NOTE: The deck wheels are an anti-scalp feature of the deck and are not designed to support the weight of the cutting deck.

Refer to Leveling the Deck on page 20 of this manual for more detailed instructions regarding various deck adjustments.

Starting the Engine

WARNING: Do not operate the tractor if the interlock system is malfunctioning. This system was designed for your safety and protection.

NOTE: Refer to the TRACTOR SET-UPon page 8 of this manual for Gasoline and Oil fill-up instructions.

1.Insert the tractor key into the ignition switch.

2.Place the PTO (Blade Engage) knob (or lever) in the disengaged (OFF) position.

3.Engage the tractor’s parking brake.

4.Activate the choke control.

5.Turn the ignition key clockwise to the START position. After the engine starts, release the key. It will return to the ON position.

IMPORTANT: Do NOT hold the key in the START posi- tion for longer than ten seconds at a time. Doing so may cause damage to your engine’s electric starter.

6.After the engine starts, deactivate the choke control and place the throttle control in the FAST position.

NOTE: Do NOT leave the choke control on while operat- ing the tractor. Doing so will result in a “rich” fuel mixture and cause the engine to run poorly.

Stopping the Engine

WARNING: If you strike a foreign object, stop the engine, discon- nect the spark plug wire(s) and ground against the engine. Thoroughly inspect the machine for any damage. Repair the damage before restarting and operating.

1.If the blades are engaged, place the PTO (Blade Engage) knob (or lever) in the disengaged (OFF) position.

2.Turn the ignition key counterclockwise to the STOP position.

3.Remove the key from the ignition switch to prevent unintended starting.

Driving The Tractor

WARNING: Avoid sudden starts, excessive speed and sudden stops.

WARNING: Do not leave the seat of the tractor without first placing the PTO (Blade Engage) knob (or lever) in the disengaged (OFF) position, depressing the brake pedal and engaging the parking brake. If leaving the tractor unattended, also turn the ignition key off and remove the key.

1.Depress the brake pedal to release the parking brake and let the pedal up.

2.Move the throttle lever into the FAST (rabbit) position.

IMPORTANT: Do NOT use the shift lever to change the direction of travel when the tractor is in motion. Always use the brake pedal to bring the tractor to a complete stop before shifting.

3.To move forward, place the shift lever in the FOR- WARD position, then slowly depress the drive pedal until the desired speed is achieved.

4.To move in reverse, place the shift lever in the REVERSE position, check that the area behind is clear then slowly depress the drive pedal.

4

Operating

Your Lawn

Tractor

WARNING

If you strike a foreign object, stop the engine, disconnect the spark plug wire(s) and ground against the engine. Thoroughly inspect the machine for any damage. Repair the damage before restarting and operating.

Avoid sudden starts, excessive speed and sudden stops.

Do not leave the seat of the tractor without first placing the PTO (Blade Engage) knob (or lever) in the disengaged (OFF) position, depressing the brake pedal and engaging the parking brake. If leaving the tractor unattended, also turn the ignition key off and remove the key.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents OPERATOR’S Manual Table of Contents Slope Gauge Replace gasoline cap and tighten securely Use only an approved gasoline containerGeneral Operation Never allow children or others in or on towed equip- ment This manual and on the machine Slope OperationService Attaching the Battery Cables Setting Up Your Lawn TractorGas and Oil Fill-up Remove the hex bolt and wing nut from the negative cableAttaching The Steering Wheel Shipping Brace RemovalQuick Adjustment Seat Standard Adjustment SeatKnob Adjustment Seat Attaching The SeatIf so equipped Identifying the Mulch PlugCruise Control Button Operating Your Lawn TractorThrottle Control Lever Ignition Switch ModuleChoke Control Brake PedalSeat Adjustment Lever If Equipped Systems Indicator Monitor If EquippedElectric PTO Blade Engage PTO Blade Engage LeverReverse Caution Mode Safety Interlock SwitchesParking Brake Button Cruise Control ButtonEngaging the Parking Brake Setting the Cutting HeightTo use the Reverse Caution Mode Driving The Tractor Starting the EngineStopping the Engine Using the Deck Lift Lever Setting The Cruise ControlDriving On Slopes Engaging the BladesMulching If Equipped HeadlightsParking Brake Adjustment Adjusting Your Lawn TractorLeveling the Deck Front To RearSteering Adjustment Seat AdjustmentQuick Adjust Seat If so equipped Knob Adjustment Seat if so equippedMaintaining Your Lawn Tractor Cleaning the Engine And DeckKohler Single Shown EngineDeck Wash System If equipped Cutting Deck RemovalMove the tractor’s PTO Blade Engage into the OFF position Repeat steps 4-11 on the opposite side of the cutting deckTires BatteryFuses Cutting BladesChanging the Lower Deck Belt 46 Decks Changing the Deck BeltChanging the Transmission Drive Belt Belt Cover For an extended period Storing your tractor Rear Wheel Weight KitInch Two-stage Snow Thrower Inch Deck Mulch KitYour Responsibility Restrict the use Safety LabelsClean pre-cleaner, if so equipped Spark plug wires looseHousing Wide Dirty air cleaner06.18.06 WarrantyUpper Drive Belt Transmission Replacement Parts
Top Page Image Contents