Service & Adjustments, Cleaning Mower, Blade Care

Pivot Points

•Lubricate the pivot points on the blade control handle, brake cable and the cutting height adjustment lever at least once a season with light oil. The blade control handle must operate freely in both directions. The cutting height adjustment lever should be able to move easily.

Engine

• Follow the engine manual instructions and recommended schedule for lubricating engine components.

Cleaning Mower

The underside of the mower deck should be cleaned after each use to prevent any build-up of grass clippings, leaves, dirt, or other debris. If this debris is allowed to accumulate, it will result in rust and corrosion.

•Disconnect spark plug wire.

•Drain the gasoline from the lawn mower, or place a piece of plastic under the gas cap.

•Tip the mower so that it rests on the housing. Keep the side with the air cleaner facing up. Hold the mower firmly.

•Scrape clean the underside of the deck with a suitable tool.

•Put the mower back on its wheels on the ground. If you had put plastic under the gas cap, make sure to remove it now.

WARNING: Never tip the mower more than 90 degrees and do not leave the mower tipped for any length of time. Oil can drain into the upper part of the engine causing a starting problem.

Engine Maintenance

•A list of key maintenance jobs required for good performance by the mower is given below. Follow the accompanying engine manual for detailed list and instructions.

•Change engine oil after the first two operating hours and every 25 operating hours thereafter. Check the oil level before starting the engine every time.

•Service foam filter in the air cleaner every 25 hours of use and replace the paper filter component every 100 hours. You may have to service the air filter more frequently if you are operating the mower under extremely dusty conditions.

•Clean the engine periodically. Remove dirt and debris with a cloth or brush. We do not recommend using a garden hose to clean mower unless the muffler, air filter and the carburetor are covered to keep water out. Water in engine can shorten engine life.

•Clean the spark plug and reset the gap to .030” at least once a season or every 50 hours of operation. Spark plug replacement is recommended at the start of each season. Refer to the engine manual for correct spark plug type.

•Inspect muffler periodically, and replace if necessary. Damaged mufflers or spark arresters can create a fire hazard. Make sure to avoid muffler and surrounding areas while the mower engine is hot because temperature of these areas of the engine may exceed 150o F.

SECTION 10: SERVICE & ADJUSTMENTS

Blade Care

Periodically inspect the blade adapter for cracks, especially if you strike a foreign object. Replace when necessary.

WARNING: When removing the cutting blade for sharpening or replacement, protect hands by using heavy gloves or a rag to grasp the cutting blade.

•Disconnect spark plug wire from spark plug.

•Turn mower on its side making sure that the air filter and the carburetor are up.

To Remove Blade

•Remove the bolt and blade bell support which hold the blade and adapter to the engine crankshaft. See Figure 9A.

LC-436 specifications

The White LC-436 is a modern, versatile vehicle that stands out in the crowded automotive market, combining functionality and aesthetic appeal. Designed with an emphasis on efficiency and performance, it meets the demands of both city driving and rugged terrains, making it an ideal choice for a variety of users, from families to adventurous individuals.

One of the standout features of the White LC-436 is its powerful engine options. Equipped with a range of turbocharged engines, the vehicle offers excellent fuel efficiency without compromising on power. The engine lineup includes both petrol and diesel variants, catering to diverse consumer preferences. The advanced engineering behind the engines ensures that the LC-436 delivers smooth acceleration and consistent performance, whether in stop-and-go traffic or on open highways.

The design of the White LC-436 emphasizes aerodynamics, which not only contributes to its striking exterior but also enhances its overall efficiency. The sleek contours and bold front grille create a commanding presence on the road, while the spacious interior is crafted with comfort in mind. High-quality materials are used throughout the cabin, providing an inviting atmosphere for both the driver and passengers.

In terms of technology, the LC-436 is packed with innovative features that enhance the driving experience. The infotainment system includes a touchscreen interface that supports smartphone integration, allowing for easy access to navigation, music, and communication apps. Additionally, advanced driver-assistance systems such as adaptive cruise control, lane-keeping assist, and collision avoidance technology are integrated to ensure safety and ease of use.

The handling capabilities of the White LC-436 are also noteworthy. With a sophisticated suspension system and responsive steering, the vehicle offers a smooth ride across various terrains. All-wheel drive options further enhance its off-road capabilities, making it suitable for outdoor adventures.

Manufactured with sustainability in mind, the White LC-436 incorporates eco-friendly technologies, such as energy-efficient lighting and reduced emissions. This commitment to the environment is increasingly important to today's consumers.

In summary, the White LC-436 combines advanced engineering, modern design, and cutting-edge technology, establishing itself as a versatile and reliable vehicle. Whether navigating city streets or exploring off the beaten path, the LC-436 is well-equipped to meet the needs of drivers in today's dynamic world.