Westinghouse ul-es-bethany-who9 Check main and branch circuit fuses or circuit breakers

Page 20

Troubleshooting guide

TROUBLE

SUGGESTED REMEDY

UL-ES-Bethany-WH09

If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, please consult with your authorized electrician and do not attempt any electrical repairs yourself.

1. If fan does not start:

1. Check main and branch circuit fuses or circuit breakers.

 

2.

Check wire connections as performed in step #15 or #16 of installation.

 

 

CAUTION: Make sure main power is turned off.

 

3. Make sure forward/reverse switch is firmly in up or down position.

 

 

Fan will not operate when switch is in the middle.

 

4.

If the fan still will not start, contact a qualified electrician.

 

 

Do not attempt to troubleshoot internal electrical connections yourself.

2. If fan sounds noisy:

1. Check to make sure all screws in motor housing are snug (not over tightened).

 

2. Check to make sure the screws which attach the fan blade holder to the motor are tight.

 

3.

Some fan motors are sensitive to signals from Solid State variable speed controls.

 

 

DO NOT USE a Solid State variable speed control.

 

4.

Allow “break-in” period of 24 hours. Most noises associated with a new fan will disappear

 

 

after this period.

3. If fan wobbles:

All blades are weighed and grouped by weight. Natural woods vary in density which could cause

 

the fan to wobble even though all blades are weight-matched. The following procedures should

 

eliminate most of the wobble. Check for wobble after each step.

 

1.

Check that all blades are screwed firmly into blade holders.

 

2.

Check that all blade holders are tightened securely to motor.

 

3.

Make sure that canopy and mounting bracket are tightened securely to ceiling joist.

 

4.

If blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute

 

the weight and possibly result in smoother operation.

4. If light does not work:

1. Check to see that the wire connections in the switch housing are connected.

 

2.

Check for faulty light bulbs.

 

3.

If light kit will still not operate, contact a qualified electrician for assistance.

NOTICE

This ‘Energy Policy Act 2005’ compliant fan includes a device that limits the total wattage of its light fixture to 190 watts.

By installing a combination of light bulbs that exceeds 190 watts or if an electrical surge causes the wattage to exceed 190 watts, the light fixture will either dim the lights to 190 watts or will automatically turn off.

To restore the light levels, make sure the total wattage of the light bulbs does not exceed 190 watts and follow the applicable directions below:

For fans with Pull Chains:

Pull the light fixture’s pull chain two times to reset the light fixture. If the power to your fan is controlled by a toggle wall switch, it may be necessary to turn the power off and back on at the wall switch.

For fans with Wall Controls:

Press the light button on the wall control “off” and “on”

once to reset the light fixture.

For fans with Remote Controls:

If you verify the wattage and the lights do not turn on, press the light button on the remote control twice to reset the light fixture.

NOTE: If the procedures above do not reset the lights,

turn off the main power source, located at the breaker panel or box,

and then turn it on again.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Manual del usuario Safety tips Consejos de seguridad Features Características Instalación conCOMBO-BLADE PREPARING for installation Antes de la instalación UL-ES-Bethany-WH09 MOUNTING OPTIONS Opciones DE Montaje Choose a MOUNTING OPTION Elija una Opción DE MontajeProceed Directly to PAGE 14 FOR WIRING OPTIONS FLUSH MOUNT Option Opción DE Instalación AL RASNORMAL DOWNROD OPTION Para Cielorraso NormalOpción CON Varilla Vertical MÁS Larga Loosen downrod ball 1 from downrod 2 by removing set screwSlide downrod ball 1 off of downrod and remove pin UL-ES-Bethany-WH09 Mounting Montaje Wiring Options Opción DE CableadoAsegure el ventilador al cielorraso Blade Installation Instalación de las paletas UL-ES-Bethany-WH09 OPERATION AND MAINTENANCE OperationOperación y mantenimiento OperaciónFan will not operate when switch is in the middle Weight and possibly result in smoother operationCheck for faulty light bulbs Check main and branch circuit fuses or circuit breakersReparar conexiones eléctricas internas No los apriete demasiadoAl motor estén apretados No USE un control de velocidad variable de estado sólidoUL-ES-Bethany-WH09 PARTS LIST Lista DE Repuestos Interruptor de control de luzUL-ES-Bethany-WH09

ul-es-bethany-who9 specifications

The Westinghouse UL-ES-Bethany-WHO9 is an advanced model in the realm of energy-efficient lighting solutions, showcasing a harmonious blend of functionality, technology, and design. This innovative fixture has been engineered to provide not only optimal illumination but also enhanced energy savings and sustainability.

One of the standout features of the UL-ES-Bethany-WHO9 is its utilization of LED technology. With LED lights known for their long lifespan and minimal energy consumption, users can expect significant reductions in electricity bills while enjoying bright and consistent lighting. The fixture is designed to deliver a luminous efficiency that exceeds traditional incandescent or fluorescent options, ensuring that spaces are well-lit without excessive energy expenditure.

A key characteristic of this fixture is its versatility in application. Whether it is used in residential, commercial, or industrial settings, the Westinghouse UL-ES-Bethany-WHO9 adapts seamlessly. It is available in various color temperature options, allowing users to personalize the ambiance according to their needs. From warm white hues that create a cozy feel in living areas to cooler tones that enhance productivity in workplaces, this fixture caters to a wide range of preferences.

Durability is another essential aspect of the UL-ES-Bethany-WHO9. Constructed with high-quality materials, the fixture is resistant to environmental factors such as moisture and dust, making it suitable for diverse settings including kitchens, bathrooms, and workshops. The robust design ensures that it can withstand the rigors of daily use, further extending its lifespan.

In addition to its practical features, the Westinghouse UL-ES-Bethany-WHO9 incorporates smart technology. It can be easily integrated into home automation systems, allowing users to control lighting remotely or set it on schedules. This feature not only boosts convenience but also contributes to energy management by enabling users to monitor and reduce their overall energy consumption.

Overall, the Westinghouse UL-ES-Bethany-WHO9 stands out in the lighting market due to its innovative LED technology, versatility in application, durability, and smart capabilities. This fixture represents an intelligent choice for those looking to enhance their environment with efficient, reliable, and customizable lighting solutions. As the demand for energy-efficient products continues to grow, the UL-ES-Bethany-WHO9 is poised to meet these needs while providing exceptional performance and value.
Top Page Image Contents