Westinghouse UL-ES-Elite-WH11 manual TrOUBLESHOOtinG GUidE

Page 21

 

 

UL-ES-Elite-WH11

trOUBLESHOOtinG GUidE

If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some

cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting

 

 

chart. If a problem cannot be remedied, please consult with your authorized electrician and do not attempt any electrical repairs

TROUBLE

SUGGESTED REMEDY

yourself.

 

1. If fan does not start:

1. check main and branch circuit fuses or circuit breakers.

 

2. check wire connections as performed in step #15 or #16 of installation.

 

CAUTION: Make sure main power is turned off.

 

3. Make sure forward/reverse switch is firmly in up or down position.

 

Fan will not operate when switch is in the middle.

 

4. If the fan still will not start, contact a qualified electrician.

 

Do not attempt to troubleshoot internal electrical connections yourself.

2. If fan sounds noisy:

1. check to make sure all screws in motor housing are snug (not over tightened).

 

2. check to make sure the screws which attach the fan blade holder to the motor are tight.

 

3. Some fan motors are sensitive to signals from Solid State variable speed controls.

 

DO NOT USe a Solid State variable speed control.

 

4. Allow “break-in” period of 24 hours. Most noises associated with a new fan will disappear

 

after this period.

3. If fan wobbles:

All blades are weighed and grouped by weight. Natural woods vary in density which could

 

cause the fan to wobble even though all blades are weight-matched. The following

 

procedures should eliminate most of the wobble. check for wobble after each step.

1.check that all blades are screwed firmly into blade holders.

2.check that all blade holders are tightened securely to motor.

3.Make sure that canopy and mounting bracket are tightened securely to ceiling joist.

4.If blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute the weight and possibly result in smoother operation.

4.If light does not work: 1. check to see that the wire connections in the switch housing are connected.

2.check for faulty light bulbs.

3.If light kit will still not operate, contact a qualified electrician for assistance.

NOTICE

This ‘energy Policy Act 2005’ compliant fan includes a device that limits the total wattage of its light fixture to 190 watts.

By installing a combination of light bulbs that exceeds 190 watts or if an electrical surge causes the wattage to exceed 190 watts, the light fixture will either dim the lights to 190 watts or will automatically turn off.

To restore the light levels, make sure the total wattage of the light bulbs does not exceed 190 watts and follow the applicable directions below:

For fans with Pull Chains:

Pull the light fixture’s pull chain two times to reset the light fixture. If the power to your fan is controlled by a toggle wall switch, it may be necessary to turn the power off and back on at the wall switch.

For fans with Wall Controls:

Press the light button on the wall control “off” and “on”

once to reset the light fixture.

For fans with Remote Controls:

If you verify the wattage and the lights do not turn on, press the light button on the remote control twice to reset the light fixture.

NOTE: If the procedures above do not reset the lights,

turn off the main power source, located at the breaker panel or box,

and then turn it on again.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Manual del usuario Safety tips Consejos de seguridad Varilla vertical Features CaracterísticasPREPARING for installation Antes de la instalación No quite Elija una Opción DE Montaje Mounting Options Opciones DE MontajeFlush Mount Option Opción DE Instalación AL RAS Proceed Directly to page 13, for Wiring OptionsNormal Downrod Option Para Cielorraso NormalOpción CON Varilla Vertical MÁS Larga Slide downrod ball 1 off of downrod and remove pin UL-ES-Elite-WH11 Mounting Montaje Opción DE Cableado Wiring OptionsSecure To Ceiling Screws securely. Repeat for all blade assemblies Blade Installation Instalación de las paletasRemoved in step Re-install the spot head cover ring by twisting clockwise UL-ES-Elite-WH11 Operation OPEratiOn and MaintEnanCEFuncionamiento OPEraCión Y MantEniMiEntOTrOUBLESHOOtinG GUidE GUía Para SOLUCiOnar PrOBLEMaS UL-ES-Elite-WH11 Westinghouse Lighting Corporation

UL-ES-Elite-WH11 specifications

The Westinghouse UL-ES-Elite-WH11 is a state-of-the-art energy-saving solution designed for modern homes and commercial applications. Recognized for its sleek design and high efficiency, the UL-ES-Elite-WH11 is engineered to both meet and exceed the energy standards set for contemporary water heating systems.

One of the standout features of the UL-ES-Elite-WH11 is its advanced heat pump technology. This innovative system harnesses ambient air to heat water, making it one of the most energy-efficient water heaters on the market. By utilizing a fraction of the energy compared to traditional heating methods, users can expect significant reductions in their utility bills without compromising on performance.

In terms of capacity, the UL-ES-Elite-WH11 is designed to accommodate various household sizes and needs. Whether you are a small family or managing a larger space, this unit provides flexibility with its impressive storage capacity. Its external controls enable users to easily adjust temperature settings, ensuring that you get just the right amount of hot water when you need it.

Safety and reliability are also paramount in the design of the UL-ES-Elite-WH11. It comes equipped with multiple safety features, including over-temperature protection and a pressure relief valve. These measures, coupled with the unit's durable construction, ensure that it delivers consistent performance over time.

Another key characteristic is the UL-ES-Elite-WH11’s low maintenance requirements. The unit is designed for ease of service, minimizing the time and effort needed for upkeep. This is particularly beneficial for busy households and commercial entities looking to optimize their operational efficiency.

Additionally, this model adheres to stringent environmental standards, making it an eco-friendly choice. The energy-efficient design not only reduces carbon footprints but also appeals to consumers looking for sustainable living options.

In conclusion, the Westinghouse UL-ES-Elite-WH11 stands out as a premier choice for efficient and reliable water heating. With its innovative technologies, user-friendly features, and commitment to sustainability, it represents a smart investment for those aiming to enhance their home or business with a top-tier water heating solution.
Top Page Image Contents