Safety tips

UL-ES-Elite-WH11

OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT TO OUTLET BOX MARKED "ACCEPTABLE FOR FAN SUPPORT",

AND USE THE OUTLET SCREWS PROVIDED WITH THE OUTLET BOX. MOST OUTLET BOXES COMMONLY USED FOR THE SUPPORT OF LIGHTING FIXTURES

ARE NOT ACCEPTABLE FOR FAN SUPPORT AND MAY NEED TO BE REPLACED. CONSULT A QUALIFIED ELECTRICIAN IF IN DOUBT.

1.Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards (ANSI/NFPA 70-1999), including fire-rated construction.

2.Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.

3.After making the wire connections, gently push connections into outlet box with wire nuts pointing up. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

4.Before you begin installing the fan, switch power off at service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

5.Be cautious! Read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams.

6.When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

7.Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7 feet from the floor to the trailing edge of the blade.

8.To reduce the risk of fire, electric shock, or personal injury, this fan must be mounted to an outlet box marked suitable for fan support, and use the mounting screws provided with the outlet box. (Mounting must support at least 35 lbs.)

9.WARNING! Do not bend blade holders during installation to motor, balancing or during cleaning. Do not insert foreign object between rotating blades.

10.Attach the mounting bracket using only the hardware supplied with the outlet box. Fan is only to be mounted to an outlet box marked“Acceptable for Fan Support”.

11.WARNING! To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control.

12.If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.

13.NEVER place a switch where it can be reached from a tub or shower.

14.The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heating equipment manufacturer’s guideline safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

15.Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

16.All set screws must be checked and re-tightened where necessary before installation.

	TOOLS REQUIRED
Phillips Screwdriver	Wire Cutters	Pliers	Step Ladder

UL-ES-Elite-WH11 specifications

The Westinghouse UL-ES-Elite-WH11 is a state-of-the-art energy-saving solution designed for modern homes and commercial applications. Recognized for its sleek design and high efficiency, the UL-ES-Elite-WH11 is engineered to both meet and exceed the energy standards set for contemporary water heating systems.

One of the standout features of the UL-ES-Elite-WH11 is its advanced heat pump technology. This innovative system harnesses ambient air to heat water, making it one of the most energy-efficient water heaters on the market. By utilizing a fraction of the energy compared to traditional heating methods, users can expect significant reductions in their utility bills without compromising on performance.

In terms of capacity, the UL-ES-Elite-WH11 is designed to accommodate various household sizes and needs. Whether you are a small family or managing a larger space, this unit provides flexibility with its impressive storage capacity. Its external controls enable users to easily adjust temperature settings, ensuring that you get just the right amount of hot water when you need it.

Safety and reliability are also paramount in the design of the UL-ES-Elite-WH11. It comes equipped with multiple safety features, including over-temperature protection and a pressure relief valve. These measures, coupled with the unit's durable construction, ensure that it delivers consistent performance over time.

Another key characteristic is the UL-ES-Elite-WH11’s low maintenance requirements. The unit is designed for ease of service, minimizing the time and effort needed for upkeep. This is particularly beneficial for busy households and commercial entities looking to optimize their operational efficiency.

Additionally, this model adheres to stringent environmental standards, making it an eco-friendly choice. The energy-efficient design not only reduces carbon footprints but also appeals to consumers looking for sustainable living options.

In conclusion, the Westinghouse UL-ES-Elite-WH11 stands out as a premier choice for efficient and reliable water heating. With its innovative technologies, user-friendly features, and commitment to sustainability, it represents a smart investment for those aiming to enhance their home or business with a top-tier water heating solution.