Musical Fidelity M6I manual Computer setup for input USB input, PC users, Mac users

Page 11

OPERATION

USB input

For the USB input, the LED will flash in absence of digital input signal. When a signal is present, the LED will light continuously.

Computer setup for input USB input

A good quality USB A to B cable is required to connect the unit to the computer. Plug the B (square) end into the socket in the back of the M6i

Plug the A (rectangle) end into a free USB socket on the computer.

The computer should detect the new hardware and install a generic driver automatically (No setup or driver disk required).

CD, MP3, WAV files played on any software should now play through the M6i. This device has been designed to work with PC Windows 98, ME, 2000, XP as well as Apple Macintosh OS X.

Please note:

This device is a high speed serial data processor, and by its nature, requires a very high volume of USB bandwidth. It will benefit greatly from being the only device connected on its USB ‘bus’. Sharing the same bus with other devices may cause unwanted artefacts such as dropouts or temporary loss of signal. This especially includes the use of the M6i on a USB hub/splitter alongside other USB components

PC users-

Check the computer has picked up the device and is currently using it by clicking: (most Windows versions)

-Start

-Settings

-Control panel

-Sounds and Multimedia

-Audio

Check that “USB audio device” appears under PREFERRED AUDIO DEVICE tab

A second mixer will now be available which will be the default mixer whenever the M6i is plugged in. Use this mixer to select the source or adjust levels if required.

Mac users-

Check the computer has picked up the device and is currently using it by clicking: (MAC OS X)

-System preferences

-Hardware

-Sound

Check that “USB audio DAC” is selected under the OUTPUT tab.

If the computer’s warning sounds/chimes are to played through the M6i, make sure it is selected under the SOUND EFFECTS tab too.

Note: USB may also be selected as an output in some individual programs

Issue 4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 11 of 14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 11
Contents Instructions for use Contents It must not be plugged into a mains outlet Safety InformationIMPORTANT! U.K. only Installation, Precautions & User Information General AdviceDisposal Item Disposal InformationInstallation Facilities & Connections Amplifier section Remote Control HandsetTuner VolumeOperation StartingTape Mac users Computer setup for input USB inputUSB input PC usersPower PROBLEMS?Specifications Release Date Changes Manual History