Installation

Introduction

Congratulations on the purchase of the new M6i integrated amplifier. Great attention has been paid to internal layout, isolating each circuit section to prevent possible interaction.

The unit features a finely tuned and tweaked preamplifier, for smooth sound coupled with low noise and virtually no distortion.

The power amplifier consists of two monoblock amplifiers with separate supplies for the absolute best in separation and imaging. Generously rated, they are enough to drive even the most demanding loudspeakers with ease. Low distortion and very quiet they will deliver all music types exactly as the artist originally intended.

The resultant performance achieved by this unit is among the best in the world. It has excellent signal to noise ratio, low distortion, wide bandwidth and dynamic range, with extraordinary resolution and fine detail.

Cleaning

Before cleaning the unit, switch off power at the mains switch and remove the mains plug from the wall socket.

Clean the cabinet and remote control unit using a moist cloth. Using solvents, white spirit or thinners is not advised, as they could damage the surface finish.

Installation

Position the M6i on a stable, horizontal surface where there is no risk of it being knocked, or subjected to vibration such as from loudspeakers.

Important note:

In normal operation, the unit dissipates a small quantity of power at all times, and it is important that it is adequately ventilated. The top and bottom are perforated to allow the smooth flow of heat through the unit. It is therefore not recommended that the unit is enclosed in a cabinet or placed where the ventilation holes are impeded as this could result in excessive heat build-up.

The M6i must be protected from humidity – if the unit is moved from a cold place to a warm room, leave the unit for an hour or so to allow sufficient time for the moisture to evaporate.

Power Connections

The M6i is supplied with a standard IEC mains cable which plugs into the IEC socket at the back of the unit (see page 7)

Audio Connections

RCA Inputs: Connect all RCA single-ended sources to relevant analogue inputs (see page 7 for more information). Use good quality fully connected (signal and ground) coaxial phono cables for all RCA signal connections.

XLR Inputs: Connect any XLR balanced source to balanced analogue input (see page 7 for more information). Use good quality fully connected (signals and ground) balanced XLR cables for all XLR signal connections.

Outputs: Connect loudspeakers to the terminals on the back panel marked as LEFT and RIGHT SPEAKER outputs

The TAPE output allows loop through of analogue signals for example, to pass on to recorder or monitor. It is also the ideal output to connect our headphone amps into.

The PRE-OUToutput allows analogue signals controlled by the volume, to pass on to a second amplifier. This is useful for bi-amping.

Issue 4

Page 6 of 14

M6I specifications

The Musical Fidelity M6i integrated amplifier is a standout piece of audio equipment designed for discerning music lovers. This model is part of Musical Fidelity's renowned M6 series, known for high performance and excellent value. The M6i seamlessly combines advanced technology with an elegant aesthetic, providing an unparalleled listening experience.

At the heart of the M6i lies a powerful 200 watts per channel output, which ensures that it can drive demanding speakers with ease. This robust power delivery allows the amplifier to reproduce dynamic passages and subtle nuances in music, making it suitable for a wide range of musical genres. The M6i features a dual-mono design, which aids in channel separation and reduces crosstalk, resulting in a clean and detailed soundstage.

One of the key highlights of the M6i is its extensive connectivity options. It offers a multitude of inputs including multiple line-level RCA inputs, a dedicated phono input for vinyl enthusiasts, and both balanced XLR and unbalanced connections. This versatility allows users to connect various audio sources without any compromise in sound quality. Additionally, the amplifier includes a high-quality headphone output for personal listening.

Technologically, the M6i utilizes advanced circuitry and high-grade components to ensure optimal performance. The design emphasizes minimal signal path, which helps to preserve audio integrity and reduces distortion. Furthermore, the M6i is equipped with a sophisticated power supply that provides stable voltage and current, contributing to its dynamic range and clarity.

The build quality of the M6i is equally impressive. The chassis is constructed from premium materials, delivering not only a stunning visual presence but also exceptional durability. The front panel features a clean layout with a large volume knob, source selection switch, and a display that provides essential information at a glance.

In conclusion, the Musical Fidelity M6i amplifier represents a perfect fusion of power, versatility, and exquisite craftsmanship. Whether you're an audiophile seeking high fidelity sound or simply a music lover wanting to enhance your listening experience, the M6i offers an exceptional solution that meets a variety of needs while maintaining the signature musicality that Musical Fidelity is known for. Combining high-end performance with a user-friendly design, the M6i is a worthy investment for any serious audio setup.