Westinghouse W-042 owner manual Mounting and Wiring Instructions, Fixture Assembly Instructions

Page 4

MOUNTING AND WIRING INSTRUCTIONS

CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal between the fixture and the mounting surface by using silicone or similar caulking.

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1.Turn off power at circuit box to avoid possible electric shock.

2.Remove cap nuts (A) from back plate (B) and remove universal mounting plate or cross bar (C), leaving mounting screws (D) in place (see fig. 1).

3.Secure universal mounting plate or cross bar (C) to outlet box (E) (vertically or horizontally, see fig. 1) with outlet box screws (F) (not included).

4.Screw center pipe (G) into bottom of cage (H).

5.Slide coupling (W) if applicable, tail (I), top break (J), and bottom break (K) over center pipe (G) and secure with finial (L).

6.Identify color coding of fixture wires (see fig. 2 on page 11).

7.To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black outlet box wire. Do not twist wires.

8.Fit wire connector (M from fig. 1) over wires and twist until there is a firm connection. If wire connector (M) easily comes off, reattach and check again for a firm connection.

9.Repeat steps 7 and 8 with the white (group B from fig. 2) fixture and outlet box wires.

10.Partially thread green grounding screw (N) into side hole (O) on universal mounting plate or cross bar (C) (see fig.1).

11.Wrap ground wire from fixture and ground wire (metal or green wire) from outlet box

(E) around green grounding screw (N) on universal mounting plate or cross bar (C).

12.Tighten green grounding screw (N). Do not over tighten.

13.Tuckwires inside outlet box (E) (see fig. 1).

FIXTURE ASSEMBLY INSTRUCTIONS

1.Place back plate (B) over mounting screws (D) and secure with cap nuts (A).

2.Install lamp(s). Do not exceed recommended wattage.

3.Remove finial (P), rubber washer (T) and top break (Q) from cover (R) then separate fixture cover bracket (S) from cover (R).

4.Remove threaded cap nuts (V) from top of cage (H) (do not remove remaining 2 cap nuts).

5.Mount fixture cover bracket (S) over holes as shown in figure 1 and secure with threaded cap nuts (V).

6.Place cover (R) over nipple (U) and secure with top break (Q) and finial (P).

7.Turn power back on at circuit box.

4

Image 4
Contents Outdoor Lighting Fixture Installation Instructions Warranty Information Assembly Instructions for Outdoor Light FixtureTOP Break Q Nipple U Mounting and Wiring Instructions Fixture Assembly InstructionsGarantie Limitée DE Cinq ANS Les instructions d’installation demeurent cependant valables Instructions DE Montage ET DE Raccordement Garantía Limitada DE Cinco Años Advertencia UNA Descarga Eléctrica Podría Causar LesionesFigura Instrucciones DE Montaje Y Cableado Instrucciones DE Montaje DEL ArtefactoMise EN Garde Cleaning and Care Commande DE PiècesOrdering Parts Nettoyage ET Entretien

W-042 specifications

The Westinghouse W-042 is a notable design in the realm of advanced nuclear reactors, specifically classified as a small modular reactor (SMR). This innovative reactor is a product of Westinghouse Electric Company, renowned for its contributions to the nuclear energy sector and its commitment to developing safer, more efficient nuclear technologies.

One of the main features of the W-042 is its modular design, which allows for a compact construction footprint and enhanced scalability. This modular approach facilitates easier transport and installation, making it a suitable option for various applications, including remote locations and urban settings. The W-042 can generate approximately 225 megawatts of electrical power, making it ideal for regional power generation and industrial applications.

The W-042 is built with several advanced safety features, including a passive safety system that leverages natural forces, such as gravity and convection, to manage cooling during emergencies. This system reduces reliance on active mechanical systems and human intervention, thus enhancing the reactor's overall safety profile. In the event of an emergency, the W-042 is designed to maintain safe cooling without the need for external power or operator action, making it resilient in crisis situations.

Technologically, the W-042 utilizes advanced materials, including corrosion-resistant alloys, which enhance the reactor’s durability and extend its operational life. The reactor also incorporates digital instrumentation and control systems that provide real-time monitoring and automation. This digital edge improves operational efficiency and allows for precise management of reactor conditions, contributing to safer and more effective energy production.

The W-042 is also designed with a focus on fuel efficiency and sustainability. It utilizes a high-assay low-enriched uranium (HALEU) fuel that improves fuel utilization and reduces waste. By maximizing energy output and minimizing long-lived radioactive waste, the W-042 aligns with global efforts toward sustainable nuclear energy solutions.

In summary, the Westinghouse W-042 embodies cutting-edge technology with its modular design, enhanced safety features, and commitment to sustainability. Its efficient power generation capabilities, combined with advanced material and control technologies, position it as a viable solution for meeting the world's growing energy demands while addressing environmental concerns. As the nuclear industry evolves, innovations like the W-042 play a crucial role in shaping a sustainable and secure energy future.