Mounting and Wiring Instructions

CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal between the fixture and the mounting surface by using silicone or similar caulking.

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1.Turn off power at circuit box to avoid possible electric shock.

2.Thread mounting screws (A) into universal mounting plate (B) (see fig. 1).

3.Secure universal mounting plate (B) to outlet box (C) with outlet box screws (D) (not included).

NOTE: Mounting screws (A) must be level for fixture to hang straight.

4.Identify color coding of fixture wires (see fig. 2 on page 11).

5.To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black outlet box wire. Do not twist wires.

6.Fit wire connector (E) over wires and twist until there is a firm connection. If wire connector

(E)easily comes off, reattach and check again for a firm connection.

7.Repeat steps 5 and 6 with the white (group B from fig. 2) fixture and outlet box wires.

8.Partially thread green grounding screw (F) into side hole (G) on universal mounting plate

(B)(see fig. 1).

9.Wrap ground wire from fixture and ground wire (metal or green wire) from outlet box (C) around green grounding screw (F) on universal mounting plate (B).

10.Tighten green grounding screw (F). Do not over tighten.

11.Tuckwires inside outlet box (C).

FIXTURE ASSEMBLY INSTRUCTIONS

1.Place back plate (H) over mounting screws (A) (see fig. 1).

2.Secure into place with cap nuts (I).

3.To remove glass shade (J) from fixture cover (O), carefully support bottom of glass shade (J) while removing finial (K), cover (L), hex nut (M), and flat washer (N).

4.Carefully lower glass shade (J).

5.Install lamp(s). Do not exceed recommended wattage.

6.Replace glass shade (J) over nipple (P), then flat washer (N), hex nut (M), cover (L), and finial (K).

7.Turn power back on at circuit box.

30904 specifications

The Westinghouse 30904 is a remarkable innovation in the realm of electrical engineering, combining cutting-edge technology with practical functionality. Designed for residential applications, this specific model offers a range of features that cater to the needs of modern homeowners.

One of the standout characteristics of the Westinghouse 30904 is its efficient power management system. This model is equipped with advanced circuitry that not only enhances energy efficiency but also optimizes performance. Users benefit from reduced energy consumption, which translates into lower utility bills and a smaller carbon footprint.

The 30904 integrates high-performance components that ensure reliability and longevity. The design incorporates robust materials that withstand the rigors of daily use, providing peace of mind to homeowners who prioritize durability. Additionally, it features advanced thermal management technology that prevents overheating, extending the lifespan of the unit and maintaining consistent operation even under heavy loads.

Ease of installation is another key feature of the Westinghouse 30904. Its user-friendly design allows for straightforward setup, making it accessible even for those with limited technical knowledge. Comprehensive instructions and compatible mounting options facilitate a seamless installation process.

In terms of connectivity, the Westinghouse 30904 boasts compatibility with various smart home systems. This allows homeowners to integrate the device into their existing setups, enhancing the convenience and automation of their living spaces. Whether controlling the system via a mobile app or integrating it with voice assistants, users experience a heightened level of control over their home environment.

Safety is paramount in the design of the Westinghouse 30904. It comes equipped with multiple safety features, including circuit protection and overload safeguards that prevent electrical mishaps. This focus on safety ensures that homeowners can use the system with confidence.

In summary, the Westinghouse 30904 stands out as a technologically advanced solution for residential power needs. With its efficient energy management, durable construction, user-friendly installation, smart connectivity, and robust safety features, it represents a synthesis of functionality and innovation that meets the demands of contemporary households.