Lighting Standing Pilots
To light Cooktop Pilots:
II
1. Make sure all controls are OFF.
2.Remove the grates and reflector pans from cooktop. Lift the cook- top and rest on support rod.
3.To Ilght, hold a lit match over the pilot light located between the front and back burners. The pilot flame should be Ydto J/ain
4.If the pilot flame needs adjust- ment, turn the pilot adjustment screw on the manifold pipe.
5.Lower the cooktop and replace the grates before using the sur- face burners.
To light Oven Burner Pilot:
1. Make sure the oven control is OFF.
2.Remove the broiler drawer. Slide drawer out to stops, lift both sides, then slide the rest of the way out.
3.Hold a lit match over the oven burner pilot located at the rear of the burner.
4.After the oven burner pilot is burn- ing steady. check burner lighting by turning the Oven Control to a temperature abovel4O”F (60°C). The burner will take
5.Replace the broiler drawer.
11