Equipment Set-Up

www.clearcreekspas.com

INSTALLATION

1.Remove the plastic sheet covering the spa. Use care; stepping into the spa with shoes will scratch the acrylic surface.

2.Remove any packing materials from the spa.

3.Remove each filter cartridge from its plastic bag.

4.Pull open each skimmer/filter door by the handle lo- cated in the middle of the door and remove the skimmer basket. Then insert the filter cartridge into the filter housing and re-insert the basket so that it fits in place over the filter cartridge and close the skimmer/filter door.

5.Clean the interior of the spa of any remaining construc- tion debris. Remove stubborn stains, paint, or tar with turpentine, isopropyl alcohol or paint thinner. A mild liquid dishwashing detergent on a damp cloth is fine for cleaning off other dirt. Plaster can be removed by scraping with a wooden edge; do not use a metal scraper, wire brush, or other metal tools, as they will damage the spa’s surface.

6.Install the skirt panels which were not installed on the spa at the factory. To do this, secure with the screws provided in your spa accessory package and follow instructions provided with panels.

7.On initial start-up, it is necessary to purge and sanitize the system. Carefully follow the procedure described here to purge and sanitize your spa.

•Remove the spa cover completely.

•Close the drain valve located on the suction tee.

•Fill the spa with water to its normal operating level, which is to the water level indicator mark on the skimmer/filter frame.

•Turn on circuit breakers at the main electrical panel.

•Select JETS on the SYSTEM switch.

•Add 60cc sodium dichlor (a fast dissolving granulartype of chlorine) to the water and let the whirlpool run for 15-20 minutes only.

•Turn off JETS.

•Turn off circuit breakers.

•Immediately open the drain valve and drain the spa completely.

CAUTION: Leave the rigid cover off the spa during this procedure. Do not use the spa during this procedure. Drain the spa immediately afterward.

8.Close the drain valve and fill the spa with water to approximately 180mm (7") below the spa rim, or to water line indicator mark on the skimmer frame. (See illustration on this page.)

9.Turn on circuit breakers at the main service panel.

10.Set the heater thermostat for the maximum tem- perature.

11.Test the spa for proper operation. (Refer to Operating Instructions.)

12.Refer to Water Quality section of the Operating Instructions. Test for water quality; then add treatment chemicals to ensure proper levels.

All Jacuzzi Whirlpool Bath spas are factory tested for proper operation and watertight connections prior to shipping. If leaks or other problems are detected, immediately notify your Jacuzzi Whirlpool Bath dealer or Authorized Service Agent, or call Jacuzzi Whirlpool Bath, (510) 938-7411 (510-938-7070 in California), for Warranty Service.

www.clearcreekspas.com

oortable spa specifications

The Whirlpool Portable Spa is a sophisticated solution for relaxation and wellness, seamlessly combining modern technology with user-friendly design. Its main features and characteristics make it an ideal choice for those seeking to enhance their outdoor living experience.

One of the standout features of the Whirlpool Portable Spa is its powerful hydrotherapy system. Equipped with strategically placed jets, this spa delivers a rejuvenating massage experience, targeting sore muscles and alleviating stress. Users can customize the intensity and direction of the jets using the intuitive controls, ensuring a tailored relaxation session.

The spa’s construction is designed for durability and aesthetics. Made from high-quality, weather-resistant materials, it can withstand the elements while maintaining its elegant appearance. The exterior is available in a range of colors and finishes, allowing owners to choose a style that complements their outdoor space.

Energy efficiency is another vital characteristic of the Whirlpool Portable Spa. It comes with an advanced insulation system that minimizes heat loss, which helps maintain water temperature while reducing energy consumption. This not only benefits the environment but also translates to lower utility bills for the user.

One of the most notable technologies integrated into the Whirlpool Portable Spa is its user-friendly control panel. Featuring a digital display, it allows for easy adjustments, from water temperature settings to jet operations. Smart technology options are also available, enabling users to control their spa remotely from a mobile device, providing added convenience for the modern lifestyle.

To enhance the user experience further, the spa includes built-in LED lighting, creating an inviting atmosphere for evening relaxation. The lighting can be adjusted in terms of brightness and color, allowing for a personalized ambiance.

Maintenance is simplified thanks to the spa's filtration system. The advanced filtration technology ensures that the water remains clean and clear, while also reducing the need for frequent chemical treatments. This feature makes it easier for users to enjoy their spa without the hassle of constant upkeep.

In summary, the Whirlpool Portable Spa represents a perfect blend of comfort, technology, and practicality. Its hydrotherapy system, durable construction, energy-efficient design, user-friendly controls, and low maintenance requirements make it a top choice for anyone looking to invest in a spa experience right at home. This portable solution empowers users to enjoy relaxation and wellness anytime, anywhere, enhancing their overall quality of life.