Whirlpool oortable spa Temperature Control, Setting the Thermostat, Quantum SPA Controls

Page 21

www.clearcreekspas.com

OPERATION

Temperature Control

Turn on the heater by selecting the HTR/FILTER mode on the SYSTEM selector switch.

With this selection, you can verify that the spa’s heater is operating by viewing the HEATER ON light on the spa side panel.

Set the Temp. Control knob by rotating it to the desired temperature. (The temperature will be higher as the knob is rotated clockwise.) When the water temperature is lower than that set by the heater control, the heater and filter motor/pump will be activated. The heater and filter func- tions will automatically turn off when the desired tempera- ture is reached. When the heater is on, the water is also being filtered. The heater will also maintain water tempera- ture in the JETS mode.

The heater control is designed to maintain a minimum temperature of approximately 7-10°C (45-50°F), its lowest setting. This does not necessarily protect the spa from freezing. See page 15 for winterizing procedures.

Setting the Thermostat

You will notice by the indicator light that the heater is on when the water temperature falls below the desired tem- perature and will turn off when that temperature has been reached.

When the spa is not in use, you can set the thermostat to a lower temperature; then, when you wish to use the spa, adjust the TEMP CONTROL knob to the desired tempera- ture. The water temperature will rise at a rate of about 2°C

per hour with the optional spa cover, foam insulation and skirt panels in place and if the air temperature is 10°C (50°F) or warmer. This rate will necessitate a waiting period before using the spa, the length of which will be determined by the temperature of the water before turning on the heater. For example, if the water in the spa is kept at about 21°C (70°F) when the spa is not in use, and the desired temperature is 38°C (100°F), it will take about 8.5 hours to heat up sufficiently.

Once you have determined the desired setting on the thermostat knob, it is not necessary to change or readjust it again during normal operation unless you decide on a different setting.

The optional spa cover available for your spa will help control heat loss from the water surface and thereby reduce energy consumption. You can improve the spa’s heat retention by keeping the spa cover in place on the spa while heating the water.

Note on Determining Water Temperature:

As spa products generally perform in a narrow range of operating temperatures, we recommend that you use a medical (clinical type) thermometer for an accurate mea- surement of spa water temperature. Other types of ther- mometers, generally available, such as those used for swimming pools, are not sufficiently accurate for determin- ing spa water temperatures. Take water temperature readings in the HTR/FILTER mode when the heater has just turned off; the indicator lamp on the control panel will turn off at this time.

QUANTUM SPA CONTROLS

TEMPERATURE

WATER RAINBOW FLOW

CONTROL KNOB

CONTROL LEVER

THERMOMOTER

SYSTEM

 

SWITCH

 

ACCESSORY

 

SWITCH

 

 

www.clearcreekspas.com

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Quantum Plus Save These Instructions for Future Use Important Safety InformationQuantum PlusTM Portable Whirlpool Spa Page Specifications TOP ViewSide View Product Specifications are Subject to Change Without Notice Unpacking Inspection and Shipping ClaimBlock Service Access Positioning Your SpaElectrical Requirements Page Outdoor Installation Electrical PrecautionsIndoor Installations DrainageCle Creeks as.com Equipment Set-Up Page System Control Module Basic Control Set-UpPage Make sure the circuit breakers are in the on 1 position Setting the TimerTimer ACC Accessory ControlsSystem HEA Temperature Control Setting the ThermostatQuantum SPA Controls Page Whirlpool System Fully Adjustable Whirlpool JETSilent Air Induction Water RainbowAir Blower FiltrationWater Rainbow Spout Water Chemistry Water Quality and Water ChemistryWe recommend that you maintain a free chlorine level DisinfectingBalancing Total Alkalinity Balancing pHPage Filter Maintenance Skimmer Basket MaintenanceWater Level/Drain Normal Water LevelPage Automatic Filtration/Maintenance Factory Installed Redwood SkirtWinterizing Factory Installed Redwood Skirt Spa Light Cleaning Your SpaCovering Your Spa Repairs to the AcrylicPage Troubleshooting Guide Page No water flow from jets Problem Probable Cause RemedyPage Motor stops Page Alternate Use of Water Rainbow Spout as Fill Spout Page Jacuzzi Whirlpool Bath National Headquarters

oortable spa specifications

The Whirlpool Portable Spa is a sophisticated solution for relaxation and wellness, seamlessly combining modern technology with user-friendly design. Its main features and characteristics make it an ideal choice for those seeking to enhance their outdoor living experience.

One of the standout features of the Whirlpool Portable Spa is its powerful hydrotherapy system. Equipped with strategically placed jets, this spa delivers a rejuvenating massage experience, targeting sore muscles and alleviating stress. Users can customize the intensity and direction of the jets using the intuitive controls, ensuring a tailored relaxation session.

The spa’s construction is designed for durability and aesthetics. Made from high-quality, weather-resistant materials, it can withstand the elements while maintaining its elegant appearance. The exterior is available in a range of colors and finishes, allowing owners to choose a style that complements their outdoor space.

Energy efficiency is another vital characteristic of the Whirlpool Portable Spa. It comes with an advanced insulation system that minimizes heat loss, which helps maintain water temperature while reducing energy consumption. This not only benefits the environment but also translates to lower utility bills for the user.

One of the most notable technologies integrated into the Whirlpool Portable Spa is its user-friendly control panel. Featuring a digital display, it allows for easy adjustments, from water temperature settings to jet operations. Smart technology options are also available, enabling users to control their spa remotely from a mobile device, providing added convenience for the modern lifestyle.

To enhance the user experience further, the spa includes built-in LED lighting, creating an inviting atmosphere for evening relaxation. The lighting can be adjusted in terms of brightness and color, allowing for a personalized ambiance.

Maintenance is simplified thanks to the spa's filtration system. The advanced filtration technology ensures that the water remains clean and clear, while also reducing the need for frequent chemical treatments. This feature makes it easier for users to enjoy their spa without the hassle of constant upkeep.

In summary, the Whirlpool Portable Spa represents a perfect blend of comfort, technology, and practicality. Its hydrotherapy system, durable construction, energy-efficient design, user-friendly controls, and low maintenance requirements make it a top choice for anyone looking to invest in a spa experience right at home. This portable solution empowers users to enjoy relaxation and wellness anytime, anywhere, enhancing their overall quality of life.
Top Page Image Contents