Musical Fidelity A308 CR manual Dual Mono Preamplifier, Specifications, Instructions for Use

A308 CR
		SPECIFICATIONS :
Dual Mono Preamplifier
Output: Voltage RMS, maximum	> 30 Volts
Power, maximum	> 5 Watts
Peak-to-peak output current	0.5 Amps
Impedance	50 Ohms
Frequency response	20Hz to 20kHz ±0dB
	10Hz to 100kHz +0, -1.5dB,
Line inputs:

Total harmonic distortion + noise, 20Hz to 20kHz Signal / noise reference 1 Volt RMS output Input sensitivity for 1 Volt RMS output

Input impedance

Gain at maximum volume Overload margin Channel separation

>0.0035% (5 Volts output, maximum volume) 104dB (“A”-weighted, at half volume)

240mV

47k Ohms

12.5dB (4.2 times) 31dB

>88dB typical at 1kHz, maximum volume

Phono input:

Frequency response reference

IEC RIAA - see graph ....

20
15							RIAA RESPONSE
10
5
dB 0			RIAA
-5			A308
-10			RIAA/IEC
-15
-20
16	32	63	125	250	500	1.2K	2.5K	5K	10K	20K
				FREQUENCY

Signal / noise ref. 1Volt RMS output	> 95dB Moving Magnet		(“A”-weighted, at half volume)
	> 85dB Moving Coil		(“A”-weighted, at half volume)
Input sensitivity for 1 Volt RMS output	2.5mV Moving Magnet,
	350µV Moving Coil
Input impedance	47k Ohms
Overload margin	31dB
Inputs:	5 pairs line level via RCA connectors
	1 pair phono MM / MC switchable via RCA connectors
Outputs:	1 pair RCA connectors main output controlled by volume
	1 pair RCA connectors tape record line level output
Power requirements:	100 / 115 / 230V AC 50 / 60Hz (factory preset)
	20 watts maximum
Weight: 20 kg, 44.2 lbs unit only, un-boxed	Dimensions: 440mm, 17.3 inches wide
23 kg, 50.8 lbs in shipping carton		143mm,	5.6 inches high including feet
		410mm, 16.1 inches deep including terminals
Standard accessories:	IEC type mains lead
	Remote control handset (universal type)
	2 batteries (AAA, MN2400, LR03)

Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice.

Issue 3: July 2002	CR Pre	Instructions for Use Page 9 of 9
A308