General Advice

INSTALLATION PRECAUTIONS and USER INFORMATION

Your new A3.2 Integrated amplifier is designed and built to provide trouble-free performance, but as with all electronic devices it is necessary to observe a few precautions:

Heed all warnings shown on the back of the product.

Only connect the A3.2 Integrated amplifier to a mains outlet having the same voltage as marked at the back of the unit.

Always ensure that when disconnecting and reconnecting your audio equipment the mains supply is switched off.

Position the mains lead and signal interconnects where they are not likely to be walked on or trapped by items placed on them.

Do not use near water, or place water-filled containers on the amplifier, for example, flower vases or potted plants. If water does spill inside, immediately pull out the mains plug from the wall socket and inform your dealer, who should then check the unit before further use.

Entry of liquid into the amplifier is dangerous, and may cause electric shock or fire hazard.

Do not place the unit near heat sources such as radiators, direct sunlight or other equipment. The case of this amplifier can run at high temperatures - operate the unit in a well ventilated area, and do not touch the cabinet sides or top after periods of use at high output power.

Do not remove covers or try to gain access to the inside. There are no internal user adjust- ments. Refer all service work to an authorised Musical Fidelity agent.

NOTE: Unauthorised opening of the equipment will invalidate any warranty claims.

There are fuses inside the A3.2 amplifier. In the unlikely event that one blows, refer the unit to your audio dealer. Do NOT try to replace the fuse yourself as this will invalidate the warranty.

Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing agents - they may harm the surface finish.

The electronics in modern hi-fi equipment is complex and may, therefore, be adversely affected or damaged by lightning. For protection of your audio system during electrical storms, remove the mains plugs and disconnect any aerial lead.

If after-sales service is required, to help your dealer identify the A3.2 Integrated amplifier please quote the serial number located on the rear panel of the unit.

RADIO FREQUENCY INTERFERENCE (R.F.I)

This product has been tested to ensure that its operation is not adversely affected by normal background levels of R.F.I., and that it does not itself generate excessive amounts of interfer- ence. However, if a problem persists, please contact your Musical Fidelity agent.

Issue 1: March 2002	A3.2 Integrated Amplifier	Instructions for use Page 3 of 9

A3.2 specifications

Musical Fidelity A3.2 is an impressive integrated amplifier that has earned accolades for its performance in the realm of high-fidelity audio equipment. Known for its robust build and remarkable sound quality, the A3.2 is designed to meet the demands of audiophiles while remaining user-friendly for casual listeners.

One of the prominent features of the Musical Fidelity A3.2 is its solid-state design, which provides a clean and powerful audio output that is capable of driving a variety of speaker types with ease. With an output power of 150 watts per channel, it delivers ample strength to fill larger rooms with dynamic sound. The amplifier operates in class A/B mode, combining the benefits of Class A's warm sound signature with Class B's efficiency, resulting in minimal distortion and a highly enjoyable listening experience.

The A3.2 is equipped with an extensive selection of inputs, including multiple line-level inputs, a tape loop, and even a phono stage for vinyl enthusiasts. This versatility allows users to connect a range of components, including CD players, turntables, and streaming devices, making it an ideal hub for any home audio setup. Additionally, the amplifier has a built-in headphone output, ensuring that listeners can enjoy high-quality sound through their headphones without the need for additional equipment.

The aesthetics of the A3.2 also deserve mention, as it features a sleek and modern design that fits seamlessly into contemporary audio setups. Its durable aluminum chassis not only exudes quality but also serves to minimize resonance, thereby enhancing sound clarity.

In terms of technologies, the A3.2 employs advanced engineering principles to ensure optimal performance. It features an exceptionally low noise floor and a high damping factor, resulting in enhanced bass control and overall sound precision. Moreover, its power supply is robust, providing stable voltage and current to drive demanding loads while keeping transient response sharp.

With its combination of powerful performance, versatile connectivity options, and striking design, the Musical Fidelity A3.2 stands out as a formidable contender in the integrated amplifier market. Whether for listening to vinyl records, digital music, or streaming services, this amplifier promises a rich and immersive experience, making it a worthy investment for any audio enthusiast.