Musical Fidelity A3.2 manual Input Connections, Output Connections, PRE-AMPLIFIER Output

Page 6

All input, output and power connections should be made with the mains power switched OFF.

INPUT CONNECTIONS

The A3.2 Integrated amplifier has one pair of phono inputs, which can be used either for moving magnet (MM) or moving coil (MC) pickups.

The phono input sensitivity requirement can be changed from MM to MC by press- ing the push-button switch located on the rear panel.

Important - Do not operate the MM/MC switch with the volume control turned up.

Some turntable/pickup arm combinations are fitted with an extra wire for chassis earthing. This should be connected to the earth terminal on the back panel.

The A3.2 amplifier also has five “line level” inputs which are electrically identi- cal, and therefore suitable for use with any source component having an output of at least 300mV. The sockets on the rear panel are marked CD, TUNER, AUXIL- LIARY 1, AUXILLIARY 2, and TAPE, to correspond with function buttons on the front panel.

Connect the left and right outputs from your CD player, tuner or phono/record deck to the appropriate RCA input sockets on the back panel.

Connect the A3.2’s TAPE input sockets to the line output of your tape recorder, and A3.2’s TAPE RECORD output sockets to the line input sockets of the tape deck.

For the best results we recommend using either Musical Fidelity X-LINX "no-non- sense" cables for this connection or the highly rated Nu-Vista leads with integral

RFI suppression.

(continued)

CONNECTIONS

Various lengths are available in the Nu- Vista interconnect range. Please contact your local dealer for more information.

OUTPUT CONNECTIONS

Connect your loudspeakers to the terminals on the back panel marked as LEFT and RIGHT SPEAKER outputs.

PRE-AMPLIFIER OUTPUT

The A3.2 Integrated amplifier has its pre- amplifier output available from RCA sock- ets on the back panel marked PRE-OUT, and is controlled by the volume adjustment.

This is to allow “bi-amplification” using suitable external amplifiers and crossover networks to power the speaker drive com- ponents separately, giving noticeable improvement in clarity, imaging and bass weight.

In this arrangement, typically the A3.2’s speaker outputs are used to drive the speak- er’s “tweeter” (high audio frequencies), and an external stereo amplifier drives the “woofer” (low frequencies).

The A3.2’s PRE OUT RCA sockets would therefore be connected to the input of the external “woofer” amplifier in this exam- ple.

If you are in doubt about bi-amplification, please contact your dealer for advice.

BEFORE SWITCHING ON

Plug the accessory IEC mains lead into the rear panel socket, then the other end into a wall outlet.

Turn the volume control on the front panel to minimum (anticlockwise).

Issue 1: March 2002

A3.2 Integrated Amplifier

Instructions for use Page 6 of 9

 

 

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents A3.2 Safety Information IMPORTANT! U.K. onlyGeneral Advice Installation Precautions and User InformationRadio Frequency Interference R.F.I Connections and Facilities LEDRemote Control Remote ControlInput Connections Before Switching onConnections Output ConnectionsTape Recording OperationStarting OFF Tape MonitoringTroubleshooting Problem Possible Cause RemedySpecifications A3.2

A3.2 specifications

Musical Fidelity A3.2 is an impressive integrated amplifier that has earned accolades for its performance in the realm of high-fidelity audio equipment. Known for its robust build and remarkable sound quality, the A3.2 is designed to meet the demands of audiophiles while remaining user-friendly for casual listeners.

One of the prominent features of the Musical Fidelity A3.2 is its solid-state design, which provides a clean and powerful audio output that is capable of driving a variety of speaker types with ease. With an output power of 150 watts per channel, it delivers ample strength to fill larger rooms with dynamic sound. The amplifier operates in class A/B mode, combining the benefits of Class A's warm sound signature with Class B's efficiency, resulting in minimal distortion and a highly enjoyable listening experience.

The A3.2 is equipped with an extensive selection of inputs, including multiple line-level inputs, a tape loop, and even a phono stage for vinyl enthusiasts. This versatility allows users to connect a range of components, including CD players, turntables, and streaming devices, making it an ideal hub for any home audio setup. Additionally, the amplifier has a built-in headphone output, ensuring that listeners can enjoy high-quality sound through their headphones without the need for additional equipment.

The aesthetics of the A3.2 also deserve mention, as it features a sleek and modern design that fits seamlessly into contemporary audio setups. Its durable aluminum chassis not only exudes quality but also serves to minimize resonance, thereby enhancing sound clarity.

In terms of technologies, the A3.2 employs advanced engineering principles to ensure optimal performance. It features an exceptionally low noise floor and a high damping factor, resulting in enhanced bass control and overall sound precision. Moreover, its power supply is robust, providing stable voltage and current to drive demanding loads while keeping transient response sharp.

With its combination of powerful performance, versatile connectivity options, and striking design, the Musical Fidelity A3.2 stands out as a formidable contender in the integrated amplifier market. Whether for listening to vinyl records, digital music, or streaming services, this amplifier promises a rich and immersive experience, making it a worthy investment for any audio enthusiast.
Top Page Image Contents