Woods Equipment RBE4, RBE5, BSE5 manual Warranty

Page 22

WARRANTY

All Models Except Mow’n MachineTM Zero-Turn Mowers

Please Enter Information Below and Save for Future Reference.

 

Date Purchased: ____________________________

From (Dealer): __________________________________________

Model Number: ____________________________

Serial Number: __________________________________________

Woods Equipment Company (“WOODS”) warrants this product to be free from defect in material and workmanship. Except as otherwise set forth below, the duration of this Warranty shall be for TWELVE (12) MONTHS COMMENCING ON THE DATE OF DELIVERY OF THE PRODUCT TO THE ORIGINAL PURCHASER.

All current model loaders and backhoes are warranted for two (2) years from the date of delivery to the original purchaser.

The warranty periods for specific parts or conditions are listed below:

Part or

 

Duration (from date of

Condition

Model Number

delivery to the original

Warranted

 

purchaser)

 

 

 

Gearbox

All units listed below

2 years

Seals

 

 

 

 

 

 

BW1260, BW1620, BW1800, BW2400

8 years

 

 

 

 

BW240HD, BW180HD, BW180HB, BW126HB

7 years

 

 

 

 

BB48X, BB60X, BB72X, BB84X, BB600X, BB720X, BB840X, BB6000X, BB7200X, BB8400X,

6 years

Gearbox

DS1260, DSO1260, DS1440, TS1680, BW126-3, BW180-3, BW240

 

components

PHD25, PHD35, PHD65, PHD95, 2162, 3240, DS96, DS120, RCC42, RM550-2, RM660-2,

 

 

RD990X, PRD6000, PRD7200, PRD8400, S15CD, S20CD, S22CD, S25CD, S27CD, BW180LH,

5 years

 

TC/R74, TC/R68, TC/R60, TBW144, TBW180, TBW204

 

 

 

 

 

RDC54, RD60, RD72, TBW150C, TS/R60, TS/R52, TS/R44

3 years (1 year if used in rental or

 

commercial applications)

 

 

 

 

 

Blade

RM550-2, RM660-2, RD990X, PRD6000, PRD7200, PRD8400, 7144RD-2, 9180RD-2, 9204RD-2

3 years

spindles

 

 

 

 

 

 

BB600, BB720, BB840, BB6000, BB7200, BB8400, BW126-3, BW126HB, BW180-3, BW180HB,

 

Rust-through

BW180HD, BW1260, BW1800, BW240, BW240HD, 2162, 3240, DS1260, DSO1260, DS1440,

10 years

 

TS1680

 

 

 

 

Under no circumstances will this Warranty apply in the event that the product, in the good faith opinion of WOODS, has been subjected to improper operation, improper maintenance, misuse, or an accident. This Warranty does not apply in the event that the product has been materially modified or repaired by someone other than WOODS, a WOODS authorized dealer or distributor, and/or a WOODS authorized service center. This Warranty does not cover normal wear or tear, or normal maintenance items. This Warranty also does not cover repairs made with parts other than those obtainable through WOODS.

This Warranty is extended solely to the original purchaser of the product. Should the original purchaser sell or otherwise transfer this product to a third party, this Warranty does not transfer to the third party purchaser in any way. There are no third party beneficiaries of this Warranty.

WOODS makes no warranty, express or implied, with respect to engines, batteries, tires or other parts or accessories not manufactured by WOODS. Warranties for these items, if any, are provided separately by their respective manufacturers.

WOODS’ obligation under this Warranty is limited to, at WOODS’ option, the repair or replacement, free of charge, of the product if WOODS, in its sole discretion, deems it to be defective or in noncompliance with this Warranty. The product must be returned to WOODS with proof of purchase within thirty (30) days after such defect or noncompliance is discovered or should have been discovered, routed through the dealer and distributor from whom the purchase was made, transportation charges prepaid. WOODS shall complete such repair or replacement within a reasonable time after WOODS receives the product. THERE ARE NO OTHER REMEDIES UNDER THIS WARRANTY. THE REMEDY OF REPAIR OR REPLACEMENT IS THE SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE OF THIS WARRANTY. WOODS MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND WOODS SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY AND/OR ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

WOODS shall not be liable for any incidental or consequential losses, damages or expenses, arising directly or indirectly from the product, whether such claim is based upon breach of contract, breach of warranty, negligence, strict liability in tort or any other legal theory. Without limiting the generality of the foregoing, Woods specifically disclaims any damages relating to (i) lost profits, business, revenues or goodwill; (ii) loss of crops; (iii) loss because of delay in harvesting; (iv) any expense or loss incurred for labor, supplies, substitute machinery or rental; or (v) any other type of damage to property or economic loss.

This Warranty is subject to any existing conditions of supply which may directly affect WOODS’ ability to obtain materials or manufacture replacement parts.

No agent, representative, dealer, distributor, serviceperson, salesperson, or employee of any company, including without limitation, WOODS, its authorizeddealers,distributors,andservicecenters,isauthorizedtoalter,modify,orenlargethisWarrantyAnswers.toany questions regarding warranty service and locations may be obtained by contacting:

Woods Equipment

Company

2606 South Illinois Route 2

Post Office Box 1000

Oregon, Illinois 61061 USA

800-319-6637 tel

800-399-6637 fax www.WoodsEquipment.com

F-3079 (Rev. 1/12/2011)

Image 22
Contents BOX Scraper &REAR Blade Introduction To the DealerTable of Contents General Information SpecificationsBSE4 BSE5 RBE4 RBE5 Preparation SafetyTraining TransportationMaintenance StorageRBE BSE Be Careful Safety & Instructional DecalsSerial Number Plate RBE BSE To Avoid Serious Injury or DeathOperation Connecting AttachmentsOperation CategoryOperating Techniques BOX Scraper Angling Operating Techniques Rear BladeReversing PRE-OPERATION Check ListAdjusting or Removing Scarifier Shanks MaintenanceMaintenance BOX ScraperAfter Each Use Cleaning BOX Scraper & Rear BladeReplacing Scarifier Tooth Periodically or Before Extended StorageRemove Components from Shipping Configuration AssemblyAssembly Dealer SET-UP InstructionsAssemble Box Scraper Box Scraper AssembledRear Blade Assemble Rear BladePRE-DELIVERY Check List Dealer Check ListsDealer Check Lists Delivery Check ListCategory 1 Quick Hitch Bushing KIT #1022040 PartsBSE4 / BSE5 BOX Scraper Optional for BSE & RBE MoldelsRBE4 / RBE5 Rear Blade Parking Stand KIT #1021065 Optional for Rear Blade onlyMetric Series Torque Chart Bolt Torque ChartSAE Series Torque Chart AppendixBolt Size Chart AbbreviationsWarranty Rev /23/2005 Woods Equipment Company

BSE5, RBE4, RBE5 specifications

Woods Equipment has established itself as a prominent name in the agricultural and landscaping equipment industry, and their range of rotary cutters, particularly the RBE5, BSE5, and RBE4 models, showcases the brand’s commitment to quality and innovation.

The Woods RBE5 rotary cutter is designed for light to medium-duty applications. Its robust construction ensures durability, while the 5-foot cutting width allows for efficient operation in a variety of environments. The RBE5 features a rugged frame with a reinforced deck, providing the strength needed to tackle tough brush and tall grass. Additionally, it comes equipped with a belt-driven design, which enhances cutting performance and reduces maintenance time. The adjustable tailwheel offers improved maneuverability, allowing operators to navigate uneven terrain with ease, making it an ideal choice for landscaping professionals and property owners alike.

The BSE5 model takes versatility up a notch, specifically catering to those who require a compact rotary cutter. With similar durability and construction to the RBE5, the BSE5 is perfect for smaller tractors, providing a cutting width of 5 feet that can handle a wide range of brush and weeds. This model features a heavy-duty, all-steel construction that ensures long-lasting performance. The BSE5 also integrates a quick hitch design, allowing for convenient attachment and detachment. This means operators can quickly switch between tasks, streamlining workflow and increasing productivity on the job site.

The RBE4, on the other hand, is a smaller version, specifically designed for compact tractors. This 4-foot rotary cutter maintains the same design philosophy as its counterparts, combining durability with efficiency. The RBE4’s low-profile design allows for easy maneuvering in tight spaces, making it an excellent option for small farms or landscaping projects. Featuring a heavy-duty gear box and a smooth deck design, this model minimizes the risk of clumping and ensures an even cut.

All three models incorporate Woods Equipment’s notable safety features. The sheer bolt protection helps prevent damage to the cutter and tractor during unforeseen encounters with obstacles. Additionally, the reinforced skirt design not only adds to the structural integrity but also enhances operator safety by minimizing thrown debris.

Overall, the RBE5, BSE5, and RBE4 rotary cutters from Woods Equipment highlight the brand's dedication to delivering reliable, efficient, and safe solutions for various cutting needs in agricultural and landscaping applications. Their combination of innovative technologies and user-friendly features makes them valuable assets for professionals in the field.