Connect Hydraulic Hoses
1.Remove hydraulic fitting from the PBY port on the control valve.
2.Install elbow (4) into PBY port.
3.Connect end of hose (1) to the IN, OUT and PBY ports on the control valve.
4.Route hoses along inside right loader mount.
5.Connect hose (1) from the IN port on the control valve to the (P) port on the hydraulic manifold.
6.Connect second hose (1) from the OUT port on the control valve to the (T) port on the hydraulic manifold.
7.Connect third hose (1) from the PBY port on the control valve to the (N) port on the hydraulic manifold.
1. | 1014619 | Hose, 36" x 9/16 JICF x 9/16 JICF | Figure 18. Hydraulic Hose Installation - Control Valve | |
4. | 63558 | 9/16 JICM x 9/16 ORBM 90° | ||
|
Figure 19. Hydraulic Hose Installation
Hydraulic Manifold
MAN0530 (6/30/2006) | Hydraulic Installation 11 |
|
|