Woods Equipment MZ2661K, 872502G, 872500G manual Hydrostat Adjustments, Neutral

Page 21

WOODS

ADJUSTMENTS

HYDROSTAT ADJUSTMENTS

A turnbuckle-style hydrostat neutral adjustment is provided.

Neutral:

1.Support the machine with the rear wheels off the ground. Use jackstands or equivalent sup- port. Do not rely only on mechanical or hydraulic jacks.

2.Move the traction levers out into the neutral lock position and raise the seat.

3.Disconnect the seat switch wire K and temporarily connect the two terminals with jumper wire J as shown.

4.Start the engine and run at low speed.

5.Loosen jam nuts T at both ends of the control rod.

6.Rotate the control rod until the corresponding wheel stops turning. Lock the jam nuts. Run the engine up to high idle to check the adjustment. Readjust if necessary.

7.Repeat steps 5 and 6 for the opposite side.

8.Remove the jumper wire J and reconnect the seat switch.

Reverse Return:

1.Move traction levers out to the neutral lock posi- tion and raise the seat.

2.Locknut U should be run on the bolt as far as it will go.

3.

Loosen jam nut Y. Adjust the clevis yoke by

Right side adjustments

 

turning the head of the bolt until the clevis pin

 

 

just makes contact with the rear of the slot in the

 

 

lever it connects with. Tighten jam nut Y.

 

4.

Repeat steps 2 and 3 for the opposite side.

 

NOTE: A slight creep in reverse is acceptable provided the wheel does not turn and the hydrostat pump does not whine when the parking brake is on.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Arev MOW’N MachineWash Hands After Handling CaliforniaTo the Dealer Important MessageTo the Owner Alitec BMP Central Fabricators Gannon Gill WAIN-ROY WoodsTable of Contents Become Alert SafetyTools Required for Assembly Uncrate UnitDeck Leveling Final Preparations Counterbalance SpringsHydraulics EngineMachine First Every DailyMaintenance Record Check Daily BatteryLubrication Hydraulic System After First Five 5 HoursPeriodic OIL Changes Spark Plugs Engine OILHeavy Duty Cyclonic AIR Cleaner Fuel FilterEngine Cooling Washing Machine Cleaning MachineBlade Removal Blade InstallationSharpening Blade BalanceDeck Leveling AdjustmentsHeight of CUT Rear Deck RollersCounterbalance Springs Parking Brake Control LeversTracking Handles DampersFront Deck LIP Neutral Hydrostat AdjustmentsPUMP-DRIVE Belt Cutterdeck BeltEngines WeightDrive System Operator Presence Interlock SystemEngines Check Tire Pressures Lubricate All Points Check Nuts & Bolts Cutterdeck Drive System ConstructionSpindles ANTI-SCALP RollersParts Section Upper Engine Deck Assy Not Illustrated Description QTYLower Engine Deck ASSY/CLUTCH LOCKWSHR-3/8 Helical Description QTY Item Part noBumper Item Part no Description QTY Item Part no Fuel TANKS/CONTROL Panel TANK-FUEL LH BRAKES/REAR Wheel WLDMT-BRAKE ARM LH OIL Cooler BRKT-COOLER Front AIR Cooled Hydraulics SAE Port O Ring Item Part no Description QTYHydrogear Pump Hydrogear Part no Woods Part no Description QTY AIR Cooled Wire Harness HARNESS-WIRING Main Seat Assembly SEAT-SUSPENSION Includes Items 2-12 Optional Folding Rops KIT PIN-HITCH 1/2 STEERING/DECK Lift Spring Cradle Assembly LABEL-WARNING Cradle & Caster Assembly CUP, Outer Bearing Torque to 70 FT-LBS Deck W/ Labels 52 ZT2 3233 Deck W/ Labels 61 ZT2 BELTS-CUTTERDECK BELT-CUTTERDECK DECALS-POWER Unit LABEL-MZ DECALS-CUTTERDECKS LABEL-WARNING Blades Limited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company

872500G, 872502G, MZ2661K specifications

Woods Equipment is a renowned name in the agricultural and landscaping industry, known for its high-quality attachments and machinery designed for a variety of applications. Among its impressive lineup are the MZ2661K, 872502G, and 872500G models, each catering to specific needs and offering various advanced features and technologies.

The Woods MZ2661K is a robust equipment piece known for its versatility and reliability. It features a powerful engine that provides excellent performance in various terrain conditions. The MZ2661K includes a heavy-duty frame designed to withstand rigorous use, making it suitable for both commercial and residential landscaping needs. Its user-friendly interface allows operators to easily control and navigate the unit, enhancing productivity and efficiency on the job site. Additionally, the MZ2661K boasts an adjustable cutting height, enabling users to customize their mowing experience based on specific lawn conditions.

The 872502G model is another powerful asset in the Woods Equipment lineup. This model is particularly notable for its advanced cutting technology, designed to ensure a clean and precise cut on every pass. It comes with an optimized blade design that enhances cutting efficiency while minimizing friction and wear. The 872502G also features a robust gearbox that ensures smooth operation under various loads, making it perfect for tackling tough grass and uneven terrain. Moreover, its easy-to-torque settings allow operators to fine-tune the mower to suit their preferences and specific tasks.

Lastly, the 872500G is designed for those seeking a lightweight yet efficient solution for their mowing needs. This model is engineered with agile maneuverability, making it ideal for navigating tight spaces and intricate landscapes. Its compact design does not compromise on power; the 872500G maintains exceptional cutting performance while being easy to transport and store. It includes a durable construction that promises longevity and resilience, even with regular use.

In summary, the Woods Equipment MZ2661K, 872502G, and 872500G models showcase the perfect mixture of advanced features, reliable technologies, and durable characteristics. From powerful engines to user-friendly controls and adaptable cutting heights, these machines are designed to meet the demanding needs of modern landscaping and agricultural practices. Each model caters to different user requirements while ensuring top-notch performance and reliability, solidifying Woods Equipment's reputation as a trusted leader in the industry.
Top Page Image Contents