Woods Equipment 59HC-1 manual Leaf Mulcher Optional

Page 12

Figure 6.

Bring the belt back across the center sheave in the center groove over to the right outside sheave.

Figure 7.

Then thread it back across the front of the center sheave in the top groove.

Figure 8.

Proper Twist: The belt then follows with a 3/4 twist back under the left V-idler, up over the drive sheave and back down under the right idler pulley. This will leave a 1/4 twist in the section of belt extending from the right V-idler to lower groove of the center mower sheave.

Adjust the mower to proper cutting height. The front of the mower should be slightly lower than the rear of the best cutting and least power requirement.

Idler Adjustment: Make minor belt adjustment with idlers but keep left idler about 1" above being in line with the groove in which the belt runs on the center sheave of the mower and right idler about 1" below. Move mower fore and aft for major adjustments. On L306K210, K260, S, and F10, use belt takeup idlers on mower deck for major adjustment.

LEAF MULCHER (OPTIONAL)

1.Turn the mower upside down on saw horses. If mower has a bolt-on front shield, adjust shield all the way down in long slots. Remove side shields. Leave side skids on. If optional front roller has been installed, it must be removed.

2.On mowers with bent-down front frame, remove center baffle and drill three 7/16 diameter holes (two on 59’s) in front of mower at the diameter shown on drawing.

12 Assembly

29931 (Rev. 6/29/2007)

 

 

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Rotary Mower Introduction To the DealerTable of Contents General InformationSafety Safety RulesTraining PreparationMaintenance TransportationStorage Safety & Instructional Decals Be CarefulOperation OperationMowing Grass Tractor Operating InstructionsLubrication Belt Tension FigureSide Shield & Discharge Chute Optional EquipmentHOW to Solve Belt Problems How to Align a Twisted BeltBlade Servicing Assembly AssemblyIdler Bracket Assembly Figure Left Mounting Bracket SeeBelt Assembly & Adjustment Lift AssemblyManual Lift Assembly Belt Assembly and AdjustmentLeaf Mulcher Optional Assembly HC Idler and Mounting Bracket Assembly HC Lift and Caster Assembly 59HC Mounting Frame Assembly PartsHC Mounting Frame Assembly Part QTY DescriptionSpindle Assembly 59 & L59 Casters L306 Casters Operation Leaf Mulcher59, L59 & L306 Mower Frame Assembly 59, L59, & L306 Mower Frame Assembly Manual Height Adjustment Chain see chart for chain used on Lift Chain Hook-Up Table Bolt Torque Chart SAE Series Torque ChartAppendix Metric SeriesBolt Size Chart AbbreviationsWarranty Warranty

59HC-1 specifications

Woods Equipment has established itself as a leader in the manufacturing of high-quality agricultural and landscaping equipment, and the Woods Equipment 59HC-1 is no exception. Designed with efficiency in mind, this powerful rotary cutter offers exceptional performance for both commercial and residential applications.

One of the main features of the 59HC-1 is its robust build quality. Constructed with heavy-duty materials, it is designed to withstand the rigors of tough terrain and heavy usage. The cutter's durable steel frame and advanced engineering ensure longevity, making this model a reliable choice for users seeking a long-term investment.

The 59HC-1 utilizes a high-capacity cutting deck, which allows for a wider cutting path, significantly increasing productivity. With a cutting width of 59 inches, it enables operators to cover large areas quickly while maintaining a clean and precise cut. This feature makes it especially beneficial for tasks such as clearing brush, grass, and overgrown vegetation, making it an invaluable tool for landscapers and farmers alike.

Equipped with a powerful gearbox, the Woods Equipment 59HC-1 ensures efficient power transfer from the tractor to the cutting blades. This technology enhances the cutter's performance, allowing it to tackle even the toughest growth. The optimized blade design provides smoother operation and ensures that grass and vegetation are cut uniformly, reducing the need for multiple passes over the same area.

Another significant characteristic of the 59HC-1 is its user-friendly design. The quick-connect hitch system simplifies attachment and detachment, allowing operators to switch tools without wasting time. Additionally, the model features adjustable height settings, giving users control over cutting height according to their specific needs.

Safety is a crucial consideration in the design of the 59HC-1. With features such as a shielded blade area and safety chain, this rotary cutter protects both the operator and bystanders from potential hazards. The rugged construction combined with safety features ensures that this equipment can be used confidently in various environments.

In summary, the Woods Equipment 59HC-1 rotary cutter stands out in the market for its robust construction, high-capacity cutting performance, user-friendly features, and safety-oriented design. Whether for agricultural or landscaping purposes, this model is an excellent choice for those seeking efficiency and reliability in their equipment.
Top Page Image Contents