Woods Equipment 59HC-1 manual Transportation, Maintenance, Storage

Page 5

SAFETY RULES

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

„Do not stop, start, or change directions sud- denly on slopes.

„Use extreme care and reduce ground speed on slopes and rough terrain.

„Watch for hidden hazards on the terrain during operation.

„Stop power unit and equipment immediately upon striking an obstruction. Turn off engine, remove key, inspect, and repair any damage before resuming operation.

TRANSPORTATION

„Always comply with all state and local lighting and marking requirements.

„Never allow riders on power unit or attachment.

„Do not operate PTO during transport.

„Watch for hidden hazards on the terrain.

„Do not operate or transport on steep slopes.

„Do not operate auxiliary hydraulics during transport.

„Do not operate or transport equipment while under the influence of alcohol or drugs.

MAINTENANCE

„Before dismounting power unit or performing any service or maintenance, follow these steps: disengage power to equipment, lower the 3-point hitch and all raised components to the ground, operate valve levers to release any hydraulic pres- sure, set parking brake, stop engine, remove key, and unfasten seat belt.

„Do not modify or alter or permit anyone else to modify or alter the equipment or any of its compo- nents in any way.

„Always wear relatively tight and belted clothing to avoid getting caught in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing, and head; and respirator or filter mask where appropriate.

„Never go underneath equipment (lowered to the ground or raised) unless it is properly blocked and secured. Never place any part of the body under-

neath equipment or between moveable parts even when the engine has been turned off. Hydraulic system leak down, hydraulic system failures, mechanical failures, or movement of control levers can cause equipment to drop or rotate unexpect- edly and cause severe injury or death. Follow Oper- ator's Manual instructions for working underneath and blocking requirements or have work done by a qualified dealer.

„Make sure attachment is properly secured, adjusted, and in good operating condition.

„Keep all persons away from operator control area while performing adjustments, service, or maintenance.

„Make certain all movement of equipment com- ponents has stopped before approaching for ser- vice.

„Frequently check blades. They should be sharp, free of nicks and cracks, and securely fastened.

„Do not handle blades with bare hands. Careless or improper handling may result in serious injury.

„Your dealer can supply genuine replacement blades. Substitute blades may not meet original equipment specifications and may be dangerous.

„Tighten all bolts, nuts, and screws to torque chart specifications. Check that all cotter pins are installed securely to ensure equipment is in a safe condition before putting unit into service.

„Make sure all safety decals are installed. Replace if damaged. (See Safety Decals section for location.)

„Make sure shields and guards are properly installed and in good condition. Replace if damaged.

„Wear gloves when installing belt. Be careful to prevent fingers from being caught between belt and pulley.

STORAGE

„Block equipment securely for storage.

„Keep children and bystanders away from stor- age area.

™

59C-2 Safety Rules (Rev. 6/22/2007)

Safety 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Rotary Mower To the Dealer IntroductionGeneral Information Table of ContentsSafety Rules SafetyTraining PreparationStorage MaintenanceTransportation Be Careful Safety & Instructional DecalsOperation OperationMowing Grass Tractor Operating InstructionsBelt Tension Figure LubricationSide Shield & Discharge Chute Optional EquipmentBlade Servicing HOW to Solve Belt ProblemsHow to Align a Twisted Belt Assembly AssemblyIdler Bracket Assembly Figure Left Mounting Bracket SeeLift Assembly Belt Assembly & AdjustmentManual Lift Assembly Belt Assembly and AdjustmentLeaf Mulcher Optional Assembly HC Idler and Mounting Bracket Assembly HC Lift and Caster Assembly Parts 59HC Mounting Frame AssemblyPart QTY Description HC Mounting Frame AssemblySpindle Assembly 59 & L59 Casters L306 Casters Leaf Mulcher Operation59, L59 & L306 Mower Frame Assembly 59, L59, & L306 Mower Frame Assembly Manual Height Adjustment Chain see chart for chain used on Lift Chain Hook-Up Table SAE Series Torque Chart Bolt Torque ChartAppendix Metric SeriesAbbreviations Bolt Size ChartWarranty Warranty

59HC-1 specifications

Woods Equipment has established itself as a leader in the manufacturing of high-quality agricultural and landscaping equipment, and the Woods Equipment 59HC-1 is no exception. Designed with efficiency in mind, this powerful rotary cutter offers exceptional performance for both commercial and residential applications.

One of the main features of the 59HC-1 is its robust build quality. Constructed with heavy-duty materials, it is designed to withstand the rigors of tough terrain and heavy usage. The cutter's durable steel frame and advanced engineering ensure longevity, making this model a reliable choice for users seeking a long-term investment.

The 59HC-1 utilizes a high-capacity cutting deck, which allows for a wider cutting path, significantly increasing productivity. With a cutting width of 59 inches, it enables operators to cover large areas quickly while maintaining a clean and precise cut. This feature makes it especially beneficial for tasks such as clearing brush, grass, and overgrown vegetation, making it an invaluable tool for landscapers and farmers alike.

Equipped with a powerful gearbox, the Woods Equipment 59HC-1 ensures efficient power transfer from the tractor to the cutting blades. This technology enhances the cutter's performance, allowing it to tackle even the toughest growth. The optimized blade design provides smoother operation and ensures that grass and vegetation are cut uniformly, reducing the need for multiple passes over the same area.

Another significant characteristic of the 59HC-1 is its user-friendly design. The quick-connect hitch system simplifies attachment and detachment, allowing operators to switch tools without wasting time. Additionally, the model features adjustable height settings, giving users control over cutting height according to their specific needs.

Safety is a crucial consideration in the design of the 59HC-1. With features such as a shielded blade area and safety chain, this rotary cutter protects both the operator and bystanders from potential hazards. The rugged construction combined with safety features ensures that this equipment can be used confidently in various environments.

In summary, the Woods Equipment 59HC-1 rotary cutter stands out in the market for its robust construction, high-capacity cutting performance, user-friendly features, and safety-oriented design. Whether for agricultural or landscaping purposes, this model is an excellent choice for those seeking efficiency and reliability in their equipment.
Top Page Image Contents