Category I, Driveline Adjustment Mounted

CD7331-1

1. Tractor top link

2. Cutter top link attachment point

5. Hitch pin

Figure 2. Cutter to Tractor Connection

QUICK HITCH SET-UP AND TOP LINK ADJUSTMENT

NOTICE

■Avoid contact with driveline when raising cut-

ter.

■Make sure driveline will not bottom out at the shortest length and that it has at least 1/3 overlap at the longest length.

■With cutter adjusted to transport position, set upper stop on tractor lift quadrant to prevent cutter from contacting the driveline when being raised.

Category I and II

Refer to Figure 3.

1.To mount tractor top link, use lowest hole provided in the tractor’s top link attachment bracket.

2.Assemble hitch pins (5) in proper position.

3.Place A-frame arms (7) (square hole) on mast plate (15).

4.Secure with carriage bolts (16), sleeves (17), flat washers (18), and flange lock nuts (19).

5.Connect brace arms (6) to the brace arm pivot hole

(10)on the inside of rear lug (9).

6.Use the second hole on the end of the brace arm and secure using cap screws (20) and flange lock nuts (19).

7.Attach top link (1) to top hole (2) on A-frame arms

(7).

8.Raise cutter to transport position and adjust tractor top link until cutter is level in this position.

1.Tractor top link

2.Cutter top link attachment point

3.Floating link

5.Category I & II cutter hitch pin

6.Brace arm

7.A-frame arm

8.Quick-Hitch

9.Rear lug

10.Brace arm pivot hole

12.Break link

13.Second hole on pivot hole

15.Mast plate

Figure 3. Quick Hitch Set-Up

DRIVELINE ADJUSTMENT (MOUNTED)

Attach the cutter to the tractor 3-point hitch (or quick hitch if available). Do not attach driveline. Raise and lower cutter to determine maximum and minimum dis- tance between the tractor PTO shaft and the gearbox input shaft. If the distance is too large, the driveline will be too short for proper engagement. If distance is too small, the driveline may bottom out in operation and damage the cutter or tractor.

The driveline length must be sufficient to provide at least 1/3 driveline length of engagement during opera- tion. There must be at least 4 inches of engagement at the cutter’s lowest possible point of operation. The driv- eline must not bottom out when raised to the maximum height possible.

If driveline is too short, please call your Woods dealer for a longer driveline.

If driveline is too long, please follow the instructions for shortening the driveline.

14Operation

(Rev. 10/31/2008) MAN0654 (Rev. 10/19/2007)

BB720X, BB840XP, BB840X, BB600X specifications

Woods Equipment has established itself as a leader in the manufacturing of high-quality agricultural implements, particularly in the realm of rotary cutters. Among their standout products are the BB840X, BB600X, BB840XP, and BB720X models, which offer versatility, durability, and efficiency for land management and maintenance.

The BB840X is an exceptional rotary cutter designed for heavy-duty applications. It features a robust frame and a powerful cutting deck that allows it to tackle tough brush and dense vegetation with ease. Its innovative design includes a reinforced gearbox and unique blade configuration, ensuring maximum cutting performance. Moreover, the BB840X is equipped with an adjustable cutting height, which enhances its adaptability on various terrains.

Similarly, the BB600X offers a smaller footprint while still delivering impressive cutting capabilities. This model is particularly suited for smaller tractors and lighter-duty applications. The BB600X incorporates a rugged design that facilitates easy maneuverability, making it an ideal choice for homeowners and professional landscapers alike who are looking to maintain their properties effectively. Its efficient blade design not only provides clean cuts but also reduces maintenance time.

The BB840XP represents the next level in rotary cutting technology with its enhanced performance features. This model showcases Woods' commitment to innovation by integrating advanced technologies that improve efficiency and reduce wear and tear. The BB840XP includes a patented cutting system that allows for a smoother cutting experience, even in challenging environments. Additionally, it features superior blade support, ensuring longevity and reducing the need for frequent replacements.

Lastly, the BB720X rounds out this lineup, tailored for those seeking a balance between performance and portability. The BB720X is lightweight yet sturdy, making it suitable for a range of tasks, from mowing fields to clearing trails. Its compact design allows it to fit into tighter spaces without compromising on performance. The BB720X also boasts user-friendly adjustments, enabling operators to change cutting settings seamlessly.

All four models come equipped with Woods' durable construction and are backed by a comprehensive warranty, reflecting the company's commitment to quality. Whether for agricultural use, landscaping, or maintaining personal properties, the Woods Equipment BB840X, BB600X, BB840XP, and BB720X provide dependable solutions that enhance productivity and ensure excellent results in any cutting application.