Driveline Interference Check, To Install

DRIVELINE INTERFERENCE CHECK

1.Check for clearance between driveline and cutter deck.

2.Slowly lift cutter and observe driveline. If clearance between driveline and cutter deck is less than 1 inch, shorten top link or limit upper travel of lower hitch arms. Refer to tractor operator's manual for instructions.

CUTTING HEIGHT ADJUSTMENT (MOUNTED CUTTER)

Before working underneath, disconnect drive- line, raise cutter, lock in transport position, and block cutter securely. Hydraulic system leak down and failure of mechanical or hydraulic system can cause equipment to drop.

Keep all persons away from operator control area while performing adjustments, service, or maintenance.

■Avoid low cutting heights. Striking the ground with blades produces one of the most damaging shock loads a cutter can encounter. Allowing blades to contact ground repeatedly will cause damage to cutter and drive.

When selecting a cutting height, you should consider the area of operation. If the ground is rolling and has mounds the blades could contact, set the cutting height accordingly.

1.Level cutter from side to side. Check by measuring from cutter frame to the ground at each deck rail.

2.Adjust, using tractor 3-point arm leveling device.

NOTE: Keep the front of cutter level with or slightly lower than rear for best mowing.

3.Control cutting height with tractor 3-point arms, rear tailwheel adjustment, or optional check chains.

4.To raise rear of cutter, move tailwheel down.

5.To raise front of cutter, raise tractor 3-point arms or shorten optional check chains.

The cutting height is the distance between the blade and the ground. The blades are approxi-

mately 11.5" below the deck. To check cutting height, do the following:

a)Place a straight edge along top edge of deck.

b)Select a cutting height; as an example, for an approximate cutting height of 3", set the center of the deck 14.5" above the ground:

3" Desired cutting height

+ 11.5" Distance blade cutting edge is below deck = 14.5"

c)Adjust the front-to-rear attitude from 1/2" to 3/4" higher than the front.

CHECK CHAIN ADJUSTMENT (MOUNTED)

1.Refer to Install Check Chain (Optional), page 42 for check chain installation.

2.After making cutting height adjustment, adjust both chains (3) in check chain bracket (2) so you have the same number of links on each side. This will keep your cutting level.

2.Check chain bracket

3.Check chain

Figure 8. Check Chain Adjustment

INSTALLATION AND REMOVAL

OF DRIVELINE (TRACTOR PTO)

To Install:

Pull locking collar back and at the same time push driv- eline onto tractor PTO shaft until locking device engages.

16Operation

(Rev. 10/31/2008) MAN0654 (Rev. 10/19/2007)

BB720X, BB840XP, BB840X, BB600X specifications

Woods Equipment has established itself as a leader in the manufacturing of high-quality agricultural implements, particularly in the realm of rotary cutters. Among their standout products are the BB840X, BB600X, BB840XP, and BB720X models, which offer versatility, durability, and efficiency for land management and maintenance.

The BB840X is an exceptional rotary cutter designed for heavy-duty applications. It features a robust frame and a powerful cutting deck that allows it to tackle tough brush and dense vegetation with ease. Its innovative design includes a reinforced gearbox and unique blade configuration, ensuring maximum cutting performance. Moreover, the BB840X is equipped with an adjustable cutting height, which enhances its adaptability on various terrains.

Similarly, the BB600X offers a smaller footprint while still delivering impressive cutting capabilities. This model is particularly suited for smaller tractors and lighter-duty applications. The BB600X incorporates a rugged design that facilitates easy maneuverability, making it an ideal choice for homeowners and professional landscapers alike who are looking to maintain their properties effectively. Its efficient blade design not only provides clean cuts but also reduces maintenance time.

The BB840XP represents the next level in rotary cutting technology with its enhanced performance features. This model showcases Woods' commitment to innovation by integrating advanced technologies that improve efficiency and reduce wear and tear. The BB840XP includes a patented cutting system that allows for a smoother cutting experience, even in challenging environments. Additionally, it features superior blade support, ensuring longevity and reducing the need for frequent replacements.

Lastly, the BB720X rounds out this lineup, tailored for those seeking a balance between performance and portability. The BB720X is lightweight yet sturdy, making it suitable for a range of tasks, from mowing fields to clearing trails. Its compact design allows it to fit into tighter spaces without compromising on performance. The BB720X also boasts user-friendly adjustments, enabling operators to change cutting settings seamlessly.

All four models come equipped with Woods' durable construction and are backed by a comprehensive warranty, reflecting the company's commitment to quality. Whether for agricultural use, landscaping, or maintaining personal properties, the Woods Equipment BB840X, BB600X, BB840XP, and BB720X provide dependable solutions that enhance productivity and ensure excellent results in any cutting application.