Safety Rules

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

!LEA EL INSTRUCTIVO!

Si no lee Ingles, pida ayuda a alguien que si lo lea para que le traduzca las medidas de seguridad.

Safety is a primary concern in the design and manufacture of our products. Unfortunately, our efforts to provide safe equipment can be wiped out by an operator’s single careless act.

In addition to the design and configuration of equipment, hazard control and accident preven- tion are dependent upon the awareness, con- cern, judgement, and proper training of personnel involved in the operation, transport, maintenance, and storage of equipment.

It has been said, “The best safety device is an informed, careful operator.” We ask you to be that kind of operator.

INSTALLATION

This Loader Mounting Kit is to be used only for the loaders and tractors specified in this manual. Any other use or modification of this mounting kit may result in serious injury or death.

Hydraulics must be connected as instructed in this manual. Do not substitute parts, modify, or connect in any other way.

After connecting hoses, check that all control lever positions function as instructed in the Opera- tor's Manual. Do not put into service until control lever and equipment movements are correct.

Safety instructions are important! Read all attachment and power unit manuals; follow all safety rules and safety decal information. (Replace- ment manuals and safety decals are available from your dealer. To locate your nearest dealer, check the Dealer Locator at www.WoodsEquipment.com, or in the United States and Canada call 1-800-319- 6637.) Failure to follow instructions or safety rules can result in serious injury or death.

Keep hands and body away from pressurized lines. Use paper or cardboard, not hands or other body parts to check for leaks. Wear safety goggles. Hydraulic fluid under pressure can easily penetrate skin and will cause serious injury or death.

Make sure that all operating and service person- nel know that if hydraulic fluid penetrates skin, it

must be surgically removed as soon as possible by a doctor familiar with this form of injury or gan- grene, serious injury, or death will result. CON-

TACT A PHYSICIAN IMMEDIATELY IF FLUID ENTERS SKIN OR EYES. DO NOT DELAY.

Check that all hardware is properly installed. Always tighten to torque chart specifications unless instructed otherwise in this manual.

Air in hydraulic systems can cause erratic oper- ation and allows loads or equipment components to drop unexpectedly. When connecting equipment or hoses or performing any hydraulic maintenance, purge any air in hydraulic system by operating all hydraulic functions several times. Do this before putting into service or allowing anyone to approach the equipment.

Protective hose sleeves must cover all hydrau- lic hoses within 20 inches of the operator and be secured onto metal hose fittings. Replace hoses or sleeves if damaged or if protective sleeve cannot be properly positioned or secured.

Make sure all hydraulic hoses, fittings, and valves are in good condition and not leaking before starting power unit or using equipment. Check and route hoses carefully to prevent damage. Hoses must not be twisted, bent sharply, kinked, frayed, pinched, or come into contact with any moving parts. Operate moveable components through full operational range to check clearances. Replace any damaged hoses immediately.

Always wear relatively tight and belted clothing to avoid getting caught in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing, and head; and respirator or filter mask where appropriate.

Do not modify or alter or permit anyone else to modify or alter the equipment or any of its compo- nents in any way.

Do not allow bystanders in the area when oper- ating, attaching, removing, assembling, or servic- ing equipment.

Use a suitable lifting device of sufficient capac- ity. Use adequate personnel to handle heavy com- ponents.

Keep all persons away from operator control area while performing adjustments, service, or maintenance.

Loader Mounting Kit SR3 (4/25/2003)

Safety 3

2100042 specifications

Woods Equipment 2100042 is a top-tier rotary cutter that combines efficiency, durability, and advanced technology to meet the demands of land maintenance professionals. Designed for medium to heavy-duty tasks, this rotary cutter is an ideal solution for managing overgrown fields, pastures, and brush. The 2100042 model stands out for its robust construction and user-friendly design, making it a preferred choice among farmers, landscapers, and landowners alike.

One of the main features of the Woods Equipment 2100042 is its exceptional cutting performance. Equipped with a powerful cutting deck, the rotary cutter is capable of handling tough vegetation, including thick grass, brush, and small saplings, ensuring a clean and efficient cut every time. The cutting width of 42 inches allows for quick work over large areas, while the adjustable cutting height provides versatility depending on the specific mowing requirements.

Durability is a hallmark of the Woods Equipment brand, and the 2100042 model is no exception. Constructed with heavy-duty steel, this rotary cutter can withstand the rigors of demanding job sites. Its reinforced deck and rugged blades ensure longevity, making it a sound investment for regular use. The double-edged blades are designed for easy replacement and sharpening, enhancing operational efficiency.

Another significant aspect of the 2100042 rotary cutter is its ease of use and maneuverability. With a slip clutch protection system, users can operate the cutter with confidence, knowing that the PTO shaft is protected from shocks caused by unexpected obstacles. The unit is compatible with a variety of tractors, making it versatile and adaptable to different setups.

The Woods Equipment 2100042 also incorporates advanced features that enhance safety and ease of operation. It includes a shielded design to keep debris from flying, ensuring a safer work environment. Additionally, the cutter’s quick-attach hitch allows for fast and straightforward connection to application tractors, minimizing downtime between tasks.

In summary, the Woods Equipment 2100042 rotary cutter combines powerful cutting capabilities with rugged construction and advanced safety features. Its suitability for a wide range of applications makes it an invaluable tool for effective land management. Whether managing large fields or tackling overgrown areas, the 2100042 is designed to deliver outstanding results while making the job easier and more efficient for professionals.