Technical Specification, Warranty | Nilfisk-ALTO A500.2 specs

9Output Connector

These NEUTRIK connectors are used to connect with your speakers.

10AC Input

Use it to connect your A500.2 DRAGONFLY to the supplied AC cord only. Please check the voltage in your country before attempting toconnect the unit with the main AC.

11Fuse Holder

The fuse can protect the AC supplies circuit of the equipment.

CAUTION: if there is something wrong with the fuse or the fuse needs to change, use only the recommended fuse type as indica-ted in this unit. If the fuse continues to blow after replacing, discon- tinue using this unit before being repaired.

4.TECHNICAL SPECIFICATION

MODEL

A500.2 DRAGONFLY

20Hz 20KHz@0.1%THD, Stereo Mode

8 ohms per channel(EIAJ)

4 ohms per channel(EIAJ)

4 ohms per channel(RMS) Input Sensitivity @4 ohms Controls

Indicators (per channel)

Connectors of each channel

Power Supply

Dimension

Net Weight

260W

480W

245W (at THD 1%)

+3dBu

FRONT: Power switch, CH1 & CH2 LEVEL knobs

REAR: CH1 & CH2 LIMITER

Power-On: Green LED

Clip: Red LED

Limit: Yellow LED

Signal: Green LED

Input: COMBO connector

Output: NEUTRIK Speak-on connector

190-240 Vac~50Hz / 95-120Vac~60Hz

314W x 208.5D x 66.6H mm / 12.4" x 8.2" x 2.6"

3.85 kg (8.49lb)

5. WARRANTY

1. WARRANTY REGISTRATION CARD

To obtain Warranty Service, the buyer should first fill out and return the enclosed Wa- rranty Registration Card within 10 days of the Purchase Date.