Nilfisk-ALTO A500.2 Important Safety Instructions, Power Cord and Plug, Cleaning, Servicing

Page 3

To avoid the risk of electric shock and damage, do not subject this product to any liquid/rain or moisture. Do not use this product when in close proximity to water.

Do not install this product near any direct heat source.

Do not block areas of ventilation. Failure to do so could result in fire.

Keep product away from naked flames.

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions Follow all instructions

Keep these instructions. Do not discard. Heed all warnings.

Only use attachments/accessories specified by the manufacturer.

Power Cord and Plug

Do not tamper with the power cord or plug. These are designed for your safety.

Do not remove Ground connections!

If the plug does not fit your AC outlet seek advice from a qualified electrician. Protect the power cord and plug from any physical stress to avoid risk of electric shock. Do not place heavy objects on the power cord. This could cause electric shock or fire.

Cleaning

When required, either blow off dust from the product or use a dry cloth.

Do not use any solvents such as Benzol or Alcohol.

For safety, keep product clean and free from dust.

Servicing

Refer all servicing to qualified service personnel only.

Do not perform any servicing other than those instructions contained within the User's Manual.

2

Image 3
Contents English Safety Related Symbols Servicing Important Safety InstructionsPower Cord and Plug CleaningPreface Table of Content Front Panel FeaturesIntroduction Control ElementsRear Panel Technical Specification WarrantyWarranty Registration Card Terms and Conditions Return NoticeSeikaku Technical Group Limited