General Advice

INSTALLATION PRECAUTIONS and USER INFORMATION

Your A308 Integrated amplifier is designed and built to provide trouble-free performance, but as with all electronic devices it is necessary to observe a few precautions:

Heed all warnings shown on the back of the product.

Only connect the A308 amplifier to a mains outlet having the same voltage as marked at the back of the unit.

Always ensure that when disconnecting and reconnecting your audio equipment the mains supply is switched off.

Position the mains lead and signal interconnects where they are not likely to be walked on or trapped by items placed on them.

Do not use near water, or place water-filled containers on the amplifier, for example, flower vases or potted plants. If water does spill inside, immediately pull out the mains plug from the wall socket and inform your dealer, who should then check the unit before further use.

Entry of liquid into the amplifier is dangerous, and may cause electric shock or fire hazard.

Do not place the unit near heat sources such as radiators, direct sunlight or other equipment. The case of this amplifier can run at high temperatures - operate in a well ventilated area, and do not touch the side heatsink fins after periods of use at high output power.

Do not remove covers or try to gain access to the inside. There are no internal user adjust- ments. Refer all service work to an authorised Musical Fidelity agent.

NOTE: Unauthorised opening of the equipment will invalidate any warranty claims.

There are fuses inside the A308 Integrated amplifier. In the unlikely event that one blows, refer the unit to your audio dealer. Do NOT try to replace the fuse yourself as this will invalidate the warranty.

Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing agents - they may harm the surface finish.

The electronics in modern hi-fi equipment is complex and may, therefore, be adversely affected or damaged by lightning. For protection of your audio system during electrical storms, remove the mains plugs and disconnect any aerial lead.

If after-sales service is required, to help your dealer identify the A308 Integrated please quote the serial number located on the rear panel of the unit.

RADIO FREQUENCY INTERFERENCE (R.F.I)

This product has been tested to ensure that its operation is not adversely affected by normal background levels of R.F.I., and that it does not itself generate excessive amounts of interfer- ence. However, if a problem persists, please contact your Musical Fidelity agent.

Issue 3: March 2003	A308 Integrated Amplifier	Instructions for use Page 3 of 9

A308 specifications

The Musical Fidelity A308 is a high-end integrated amplifier that has garnered attention for its impressive performance and build quality. This amplifier represents the perfect blend of sophisticated design and advanced technology, making it a favorite among audiophiles. With its sleek and robust appearance, the A308 not only looks good but is also engineered to deliver exceptional sound quality.

One of the A308's main features is its power output. It delivers a substantial power rating of 120 watts per channel into 8 ohms, which allows it to drive even the most demanding speakers with ease. This power output is coupled with a high-current design that enhances the amplifier's ability to handle dynamic music passages without distortion. The amplifier's robust power supply ensures that it can maintain a stable performance across various conditions.

The A308 incorporates advanced Class A/B amplification technology, which provides the warmth and musicality typically associated with Class A designs while maintaining the efficiency of Class B. This makes the A308 versatile for various musical genres, from delicate classical pieces to high-energy rock concerts. Additionally, the A308 benefits from a specially designed feedback circuit that minimizes negative feedback while maintaining low distortion, ensuring accurate sound reproduction.

Another notable feature of the A308 is its impressive connectivity options. It includes multiple line-level inputs, along with both balanced XLR and unbalanced RCA connections, ensuring compatibility with a wide range of source components. The inclusion of a headphone output also adds versatility, allowing users to enjoy their music at personal listening levels without disturbing others.

The build quality of the Musical Fidelity A308 is exceptional, with a solid chassis that minimizes resonance and vibration. The high-quality components used throughout the amplifier, including high-grade capacitors and a toroidal transformer, contribute to its outstanding performance and reliability.

In summary, the Musical Fidelity A308 stands out as a premium integrated amplifier designed for discerning listeners who value both performance and aesthetics. Its powerful output, advanced Class A/B amplification technology, diverse connectivity options, and meticulous build quality make it an attractive choice for any audiophile looking to elevate their listening experience. Whether used in a high-fidelity home setup or as part of a sophisticated audio system, the A308 promises to deliver a captivating musical experience.