Yamaha EF3000iSE, EF3000iSEB owner manual Battery See Installation

w

qq

qq

788-006

e	e
e	e
r	788-007

t

y

762-044

q	e
w
	r
	762-045
EF3000iSEB to STARTER RELAY

to ENGINE

to DC-DC

CONVERTER

762-045a

AE01083

BATTERY (See page 30)

Installation

1.Loosen the bolts 1 and remove the cover 2.

2.Loosen the bolts 3 and remove the battery box 4.

3.Remove the band 5 to remove the battery 6.

4.Fill the battery with the electrolyte.

Refer to the instruction sheet included with the electrolyte for filling instructions.

5.Turn the engine switch to the “STOP” position to prevent accidental short circuiting.

6.Install the battery onto the battery box.

7.Connect the positive lead 1 to the positive battery terminal 2, then the negative lead 3 to the nega- tive battery terminal 4.

NOTE:

9Clamp the red wire to the positive (+) terminal first, then the black wire to the negative (-) terminal of the battery. Do not reverse these positions.

9For EF3000iSEB, tighten the two positive battery leads (one from the starter relay and one from the DC-DC converter) to the same positive terminal and the two negative battery leads (one from the engine and one from the DC-DC converter) to the same negative terminal.

– 13 –