ADVANTECH™ Management Software Installation
9.Click on Next again to begin the software installation. Several windows will flash on the screen. No user input is necessary until you see the End User License Agreement screen, pictured below.
10.Select the Yes checkbox, then click on Next.
11.Click on Next again.
12.Several windows will flash. Click on Finish.
13.You should have already installed your Palm™ software
and the HotSync® Manager, so you may see the Exit HotSync Manager window. Click on No to proceed.
OR
If you have not yet installed your Palm™ software and the HotSync® Manager, you may be warned that the HotSync® Manager cannot be found. Click on OK to proceed (it is recommended that the Palm™ software and the HotSync® Manager be installed prior to the ADVANTECH™ Management Software).
14.The Setup Complete window appears. Verify that Yes is selected, then click on Finish. This will restart your PC.
15.Eject the Management Software CD from the CD drive.
Note:
If the installation does not start automatically, select the Start button and choose Run. Type D:\setup and click on OK. (If your CD drive is not D, select the appropriate drive.)
9
