Data exchange between PDA & Machine
Using the Send Setup Command (continued)
4.When the operation is complete, tap on Back to return to the Select a command menu.
Note: The Management Software will not recognize the setup data you assigned to the machine until you have taken an audit and performed a HotSync® operation, to download it back to your PC.
Using the Get Audit Command
The Get Audit command allows you to track vend cycles for each machine. Audit data is then uploaded from the PDA to the PC, containing the Management Software, for analysis.
1.Aim the handheld at the machine’s receiver.
2.Tap on Get Audit, located on the Select a command screen on the PDA.
3.When the Audit is complete, the following screen appears. Tap on Back to return to the Select a command screen.
Important:
If all items on the Get Audit screen are checked, then the operation was a success. If some items are not checked, then the communication has failed. In the event of a failed audit, tap the Back button, check your aim of the PDA in relation to the control panel, and perform steps
44
