Swisher WB942 Service and Adjustments, Belts Configuration Blade Spindle Belt Replacement Removal

SERVICE AND ADJUSTMENTS

Stop engine, let all moving parts come to a complete stop. Disconnect spark plug.

BLADE SPINDLE

BELT

TRANSMISSION BELT

BLADE DRIVE BELT

BELTS CONFIGURATION

BLADE SPINDLE BELT REPLACEMENT

REMOVAL

•Stop engine, let all moving parts come to a complete stop. Disconnect spark plug.

•Remove belt cover.

•Remove Blade Drive Belt. (See Blade Drive Belt replacement.)

•Pull tension idler away from Blade Spindle Belt to relieve tension.

•Remove belt.

INSTALLATION

•Pull tension idler away from belt.

•Install belt according to above configuration.

•Install Blade Drive Belt as shown.

•Install belt cover and tighten hardware.

BLADE DRIVE BELT REPLACEMENT

REMOVAL

•Stop engine, let all moving parts come to a complete stop. Disconnect spark plug.

•Disengage all blade controls by releasing the bails.

•Remove belt cover.

•Rotate belt off pulleys and pull belt through motor belt guide.

INSTALLATION

•Route belt as shown.

•Adjust engage idler tension. Belt should be snug during engagement of blade latch. Too much tension will not allow the blade latch to function properly.

•Tighten nuts on blade engage cable when finished.

•Install belt cover and tighten hardware.