Swisher RTB1254412V, POLB10544HD, RTB105441 owner manual Stopping the Engine, Starting the Engine

Page 6

•Return lever to its vertical position to disengage blades.

•The braking system is applied when the blades become disengaged. It is designed to bring the blades to quick stop (approximately 7 seconds). Each Trail Mower brake system has been tested. For safety, the consumer should not alter the braking

system.

STOPPING THE ENGINE

•Make sure the tow vehicle parking brake is set.

•Disengage mower blades.

•Reduce engine idle speed, and allow engine to run momentarily for cooling.

•Turn key to the “OFF” position.

STARTING THE ENGINE

See engine manufacturer’s recommendations for the type and amount of oil and fuel used.

•Make sure the tow vehicle parking brake is set, mower is level, and blades are disengaged. Engine must be level to accurately check and fill oil. Do not overfill.

•Check spark plug wire, oil, and fuel.

•Check all electrical connections for build-up of debris.

•Set engine idle to “CHOKE” position.

•Turn key to the “RUN” position.

•Pull rope with a single fluid motion.

•(12V models only) Turn key to the “RUN” position, then to the “START” position.

•Set engine idle at maximum RPM for best performance.

•Allow engine to run a few moments before engaging blades.

BREAKING IN YOUR MOWER

•Set the vehicle parking brake and chock the wheels to prevent accidental rolling.

•While the engine is running, slowly, engage blade control.

•In a safe environment, i.e. no children or pets, allow blades to rotate and engine to idle for 5 minutes, breaking-in the belt for a longer life.

•Stop mower.

CAUTION: SHUT OFF THE MOWER ENGINE AND REMOVE SPARK

PLUG WIRE FROM SPARK PLUG BEFORE MAKING ANY

ADJUSTMENTS TO THE MOWER.

FRONT TO BACK ADJUSTMENT

For best cutting results, the mowing deck should be parallel to the ground. To check parallel adjustment, measure the distance from the bottom edge of the deck in both the front and rear of the deck. This adjustment is best done while the tow vehicle and Trail Mower are connected.

•Remove bolts and nuts from the “L” hitch (H1).

•Raise or lower hitch section to obtain proper front to back adjustment.

•Connect bolts and nuts in “L” hitch securely.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Rough CUT Trailmower ONRT44Limited Warranty Table of ContentsSafety Precautions Assembly Attaching Trailmower to TOW Vehicle Operating Your TrailmowerIntended USE Transporting MowerStarting the Engine Front to Back AdjustmentStopping the Engine Breaking in Your MowerStarting to MOW Mower Height AdjustmentTOW Hitch Offset Stopping the Mowing SessionCutter Maintenance General Troubleshooting Safety and Operational Decals OD36-Deflector DecalHitch BAR Assembly Front Skirt AssemblyCover Assembly = USE Paint Code TC=TEX.RED,S=SLIVER,TK=TEX.BLACKRear Axle Assembly Blade Driver AssemblyEngine Pulley Assembly Belt Engage ConfigurationEngine Pulley Configuration Console AssemblyWiring Diagram = USE Paint CodeRough Cut 44 12 Volt Start Replacement Parts 44ROUGH CUT Trailmower Swisher Mower & Machine CO. INC

RTB105441, POLB10544HD, RTB1254412V, RTB1254412V, POLB10544HD, RTB105441 specifications

The Swisher RTB105441 and POLB10544HD are two prominent models in the realm of outdoor power equipment, designed particularly for those who require efficiency and durability in their yard work. These robust mowers stand out due to their innovative features and technologies that cater to both residential and commercial users.

The Swisher RTB105441, known for its powerful performance, is equipped with a 10.5 horsepower engine, ensuring that it can tackle tough terrains effortlessly. One of its main features is the heavy-duty construction, which makes it highly resistant to wear and tear, ideal for frequent use. Its generous cutting width allows users to cover large areas quickly, making mowing less time-consuming. Additionally, the RTB105441 boasts a self-propelled drive system, allowing operators to navigate slopes and uneven ground with ease.

Similarly, the POLB10544HD model is engineered for the demanding needs of professionals. It features a high-torque engine that enhances cutting efficiency. The elevated deck design of this mower aids in preventing clumping of grass, ensuring a clean cut and a better finish. With increased blade speed, the POLB10544HD delivers an exceptional mowing experience, reducing the time spent on each task.

For enhanced user comfort, both models include adjustable height options, allowing users to customize the cutting height based on the grass type and desired finish. The ergonomic seating and control systems in these mowers ensure operators can maneuver easily, reducing fatigue during extended use.

Furthermore, the technologies incorporated into these mowers include advanced cooling systems to maintain optimal engine temperature, which extends the life of the equipment. They are also designed with easy-access maintenance features, making it simple to keep them in top condition.

In terms of safety, both the RTB105441 and POLB10544HD come with protective systems that minimize the risk of accidents. The heavy-duty frame and high-quality materials contribute to their overall longevity and reliability.

In conclusion, the Swisher RTB105441 and POLB10544HD are exceptional choices for anyone looking for high-performing mowers with advanced features and user-friendly technologies. Their robust builds, powerful engines, and innovative designs ensure they stand out in the competitive market of outdoor power equipment, catering to both landscapers and homeowners alike.
Top Page Image Contents