Swisher RTB105441, POLB10544HD, RTB1254412V owner manual Mower Height Adjustment, TOW Hitch Offset

Page 7

MOWER HEIGHT ADJUSTMENT

•There is approximately 3 inches of height adjustment.

•Rotate height adjust crank handle in a clockwise direction to lift the mower deck. A counter-clockwise direction is used to lower the mower deck.

•Dense areas of grass should be cut twice.

•Push handle down to lock height position.

TOW HITCH OFFSET

•When offsetting the mower do so to the side opposite the discharge of the tow vehicle.

•Swisher recommends if the tow vehicle is equipped with a mid-mount mower to overlap the cut approximately 6”. This may vary depending on mowing terrain, obstacles, and/or tow vehicle. Always keep safety the first priority.

•Always keep the tow vehicle cutter raised higher than the Trail Mower.

STARTING TO MOW

•Adjust the cutting height.

•Double check vehicle to mower attachment.

•Start mower engine and set throttle to “FAST” for best cutting performance.

•Slowly engage T-handle lever.

•Carefully mount vehicle and start mowing at a slow travel speed.

STOPPING THE MOWING SESSION

•Bring tow vehicle to a complete stop, set the parking brake and disengage blades.

•Turn key switch to the “OFF” position.

•Always remember to remove keys to avoid irresponsible usage.

SUGGESTED MOWING PRACTICES

•Operate mower engine at full throttle to assure the best cutting performance and maximum material discharge.

•Allow wet grass to dry. Wet grass will clump and collect under the mowing deck.

•Mowing should be started with tow vehicle in low gear and increased only as safe mowing conditions permit. Mowing speed should not exceed 5 MPH.

•Mowing conditions and the types of grass will vary from place to place. You may find when mowing dense areas that the pressure of the wheel tracks may cause the grass to be pushed down and not effectively mowed. If this happens you may want to mow the area twice. Once with the mower raised and the second mowing at the desired height. The second mowing should be at a right angle from the previous for best results.

•Reducing the travel speed will help mow dense growth. This allows the blades the time necessary to make its initial cut, and regain momentum to continue cutting and discharging debris properly. The engine may stall if you are mowing too fast!

•Do not attempt to mow areas that the tow vehicle cannot maneuver through and/or slopes that you do not feel comfortable riding.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents ONRT44 Rough CUT TrailmowerTable of Contents Limited WarrantySafety Precautions Assembly Transporting Mower Operating Your TrailmowerIntended USE Attaching Trailmower to TOW VehicleBreaking in Your Mower Front to Back AdjustmentStopping the Engine Starting the EngineStopping the Mowing Session Mower Height AdjustmentTOW Hitch Offset Starting to MOWCutter Maintenance General Troubleshooting OD36-Deflector Decal Safety and Operational Decals= USE Paint Code TC=TEX.RED,S=SLIVER,TK=TEX.BLACK Front Skirt AssemblyCover Assembly Hitch BAR AssemblyBlade Driver Assembly Rear Axle AssemblyBelt Engage Configuration Engine Pulley Assembly= USE Paint Code Console AssemblyWiring Diagram Engine Pulley ConfigurationRough Cut 44 12 Volt Start Replacement Parts Swisher Mower & Machine CO. INC 44ROUGH CUT Trailmower

RTB105441, POLB10544HD, RTB1254412V, RTB1254412V, POLB10544HD, RTB105441 specifications

The Swisher RTB105441 and POLB10544HD are two prominent models in the realm of outdoor power equipment, designed particularly for those who require efficiency and durability in their yard work. These robust mowers stand out due to their innovative features and technologies that cater to both residential and commercial users.

The Swisher RTB105441, known for its powerful performance, is equipped with a 10.5 horsepower engine, ensuring that it can tackle tough terrains effortlessly. One of its main features is the heavy-duty construction, which makes it highly resistant to wear and tear, ideal for frequent use. Its generous cutting width allows users to cover large areas quickly, making mowing less time-consuming. Additionally, the RTB105441 boasts a self-propelled drive system, allowing operators to navigate slopes and uneven ground with ease.

Similarly, the POLB10544HD model is engineered for the demanding needs of professionals. It features a high-torque engine that enhances cutting efficiency. The elevated deck design of this mower aids in preventing clumping of grass, ensuring a clean cut and a better finish. With increased blade speed, the POLB10544HD delivers an exceptional mowing experience, reducing the time spent on each task.

For enhanced user comfort, both models include adjustable height options, allowing users to customize the cutting height based on the grass type and desired finish. The ergonomic seating and control systems in these mowers ensure operators can maneuver easily, reducing fatigue during extended use.

Furthermore, the technologies incorporated into these mowers include advanced cooling systems to maintain optimal engine temperature, which extends the life of the equipment. They are also designed with easy-access maintenance features, making it simple to keep them in top condition.

In terms of safety, both the RTB105441 and POLB10544HD come with protective systems that minimize the risk of accidents. The heavy-duty frame and high-quality materials contribute to their overall longevity and reliability.

In conclusion, the Swisher RTB105441 and POLB10544HD are exceptional choices for anyone looking for high-performing mowers with advanced features and user-friendly technologies. Their robust builds, powerful engines, and innovative designs ensure they stand out in the competitive market of outdoor power equipment, catering to both landscapers and homeowners alike.
Top Page Image Contents