Towing Safety, Towing AT Night, Hydraulic Safety

SAFETY PERCAUTIONS.

TOWING SAFETY

This unit should not be towed on any street, highway, or public road without checking the existing federal, local, and state laws. Any licensing or modifications such as taillights, etc., need to comply with existing federal, local, or state vehicle requirements is the sole responsibility of the purchaser. Obey all regulations when towing on public roads and highways. See also

WARNING: NEVER TOW THE SPLITTER WITH CYLINDER IN THE OPERATING POSITION.

Turn the fuel shut-off valve if applicable OFF to prevent flooding of the engine while traveling.

Be careful when backing up. You can easily jack-knife your splitter.

TOWING AT NIGHT

The requirements for taillights are based on States regulations. Some states allow towing at night as long as the towed equipment does not visibly impair the tow vehicle taillights. This is based on a state, to state requirements. The customer is responsible for meeting the states requirements.

If a “Statement of Origin” is required in your state, see your local dealer to receive one.

HYDRAULIC SAFETY

The hydraulic system on your splitter requires careful inspection along with the mechanical parts. Be sure to replace any frayed, kinked, cracked or otherwise damaged hydraulic components. Just because it isn’t leaking today doesn’t mean that it will not fail tomorrow.

Fluid escaping from a very small hole can almost be invisible. Do not check for leaks with your hand. Escaping fluid under pressure can have sufficient force to penetrate skin causing serious personal injury or even death. Leaks can be detected by passing a piece of cardboard or wood over the suspected leak and looking for discoloration. IF injured by escaping fluid, see a doctor at once. Serious infection or reaction can develop if proper medical treatment is not administered immediately.

Should it become necessary to loosen or remove any hydraulic fittings, lines or reservoir cap, be sure to relieve all pressure by shutting of the engine and moving the control handle back and forth several times.

NEVER remove the cap from the hydraulic tank or reservoir while the unit is running. Hot oil under pressure could result in serious injury. See also SAFETY PERCAUTIONS.

The pressure relief valve on your splitter is preset at the factory. DO NOT adjust the valve. Only a qualified technician should perform this adjustment.

MAINTENANCE AND STORAGE

WARNING: DISCONNECT THE SPARK PLUG BEFORE PERFORMING ANY MAINTENANCE.

Consult the operating and maintenance instructions of the engine manufacturer for engine care.

Always check the oil level of the hydraulic reservoir before operation. Operating without an adequate oil supply will cause severe damage to the pump.

Periodically check that all nuts, bolts, screws, clamps and fittings are tight and secure.

To keep your splitter in top working condition perform all recommended maintenance procedures before you use your splitter.

If the wedge becomes dull or nicked a grinder or sharpening tool can be used to sharpen it.

Completely drain the fuel tank prior to storage. Always store gasoline in an approved, tightly sealed container. Store container in a dry, cool place with adequate ventilation. Keep fuel away from areas where fumes could contact open flame, pilot light or sparks.

LS422X specifications

The Swisher LS422X is a remarkable addition to the world of power equipment, particularly known for its innovative design and robust performance. This high-capacity log splitter represents the perfect blend of technology and convenience, making it an essential tool for both residential and commercial users who require effective wood processing solutions.

One of the standout features of the LS422X is its powerful 22-ton splitting force. This remarkable capability allows the machine to tackle even the toughest of logs with ease, ensuring that users can efficiently process their firewood without hassle. The hydraulic system employed in the LS422X is engineered for efficiency and durability, allowing for quicker cycle times and a substantial reduction in wear and tear.

The LS422X is powered by a reliable 10.5 HP OHV engine. This gas-powered engine not only provides the necessary power for heavy-duty splitting tasks but also ensures reliability and ease of use. The design of the engine allows it to operate smoothly across a range of conditions, making it a dependable choice for long hours of wood splitting.

One remarkable feature of the Swisher LS422X is its ability to operate in both horizontal and vertical positions. This versatility enables users to split logs of varying sizes and shapes more conveniently. The vertical position is particularly useful for larger, heavier logs, allowing for effortless loading without heavy lifting. This feature minimizes user strain and enhances safety during operation.

The LS422X is also equipped with a patented log cradle, which helps hold the logs in place during the splitting process, providing greater stability and precision. This design enhancement can significantly reduce the risk of injuries and ensures that the user remains in complete control throughout the wood splitting task.

Safety is paramount in any machinery, and the LS422X is no exception. It features built-in safety mechanisms, including a two-handed safety control that prevents accidental operation, ensuring that users can operate the splitter with peace of mind.

The Swisher LS422X comes with sturdy tires for enhanced mobility, allowing users to move the splitter across various terrains effortlessly. Its robust frame and construction guarantee longevity and can withstand the rigors of continuous use.

In conclusion, the Swisher LS422X is designed with the modern user in mind, combining power, versatility, and safety features into one highly efficient log splitter. Whether you are a homeowner in need of firewood for the winter or a professional looking for a reliable machine, the LS422X stands out as a top choice in the wood processing industry.