Swisher LS422X guide

•NEVER operate your splitter near a flame or spark. Hydraulic oil and gasoline are flammable and can explode.

•NEVER fill gas tank while the engine is hot or running. Allow the engine to cool before refueling.

•This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used it should be maintained in effective working order by the operator.

-NOTE-

In the state of California, the above is required by law (Section 442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester muffler (optional by manufacturer) is available at your nearest engine dealer. Check legal requirements in your area.

•ONLY use your hands to operate the control lever. NEVER use foot, knee, rope or any extension device.

•Split ONLY one log at a time. NEVER attempt to split two logs on top of each other.

•NEVER place hands or feet between log and splitting wedge or between log and ram during forward or reverse stroke. ALWAYS keep fingers clear of splits that open in log during splitting operation.

•DO NOT straddle or reach across the splitting area while operating the splitter.

•DO NOT step over splitter when the engine is running. You may trip or accidentally activate the splitting wedge. Walk around to get to the other side.

•NEVER attempt to load splitter while splitting wedge is in motion. When loading log splitter, place hands on the sides of the log, not the ends.

•NEVER attempt to split woods across the grain. Wood may burst or fly out of your splitter and result in serious injury.

•NEVER leave your splitter unattended with the engine running. Shut off the engine if you are leaving your splitter, even for a short period of time. Someone could accidentally activate the ram and be injured.

•Both ends of the log should be cut as squarely as possible to prevent the log from sliding out of the splitter during operation. Log length should be kept to 24” or less.

•NEVER operate your splitter while it is attached to the tow vehicle.

•BEFORE towing, be certain that the splitter is securely attached to the towing vehicle and that the support leg, beam and cylinder are secured in there respective towing positions.

•NEVER allow persons to ride on splitter. DO NOT carry any cargo or wood on your splitter. It may fall off and cause an accident.

•DO NOT loosen or remove any hydraulic fitting, line or reservoir cap while your splitter or engine is running.

•Fluid escaping from a very small hole can almost be invisible. DO NOT check for leaks with your hand. See maintenance section for instructions. IF injured by escaping fluid, see a doctor at once. Serious infection or reaction can develop if proper medical treatment is not administered immediately.

•DO NOT operate your splitter in poor mechanical condition or when it is need of repair.

•ALWAYS disconnect the spark plug wire and place the wire where it cannot contact the spark plug, to prevent accidental starting the engine when setting up, transporting, adjusting or repairing.

LS422X specifications

The Swisher LS422X is a remarkable addition to the world of power equipment, particularly known for its innovative design and robust performance. This high-capacity log splitter represents the perfect blend of technology and convenience, making it an essential tool for both residential and commercial users who require effective wood processing solutions.

One of the standout features of the LS422X is its powerful 22-ton splitting force. This remarkable capability allows the machine to tackle even the toughest of logs with ease, ensuring that users can efficiently process their firewood without hassle. The hydraulic system employed in the LS422X is engineered for efficiency and durability, allowing for quicker cycle times and a substantial reduction in wear and tear.

The LS422X is powered by a reliable 10.5 HP OHV engine. This gas-powered engine not only provides the necessary power for heavy-duty splitting tasks but also ensures reliability and ease of use. The design of the engine allows it to operate smoothly across a range of conditions, making it a dependable choice for long hours of wood splitting.

One remarkable feature of the Swisher LS422X is its ability to operate in both horizontal and vertical positions. This versatility enables users to split logs of varying sizes and shapes more conveniently. The vertical position is particularly useful for larger, heavier logs, allowing for effortless loading without heavy lifting. This feature minimizes user strain and enhances safety during operation.

The LS422X is also equipped with a patented log cradle, which helps hold the logs in place during the splitting process, providing greater stability and precision. This design enhancement can significantly reduce the risk of injuries and ensures that the user remains in complete control throughout the wood splitting task.

Safety is paramount in any machinery, and the LS422X is no exception. It features built-in safety mechanisms, including a two-handed safety control that prevents accidental operation, ensuring that users can operate the splitter with peace of mind.

The Swisher LS422X comes with sturdy tires for enhanced mobility, allowing users to move the splitter across various terrains effortlessly. Its robust frame and construction guarantee longevity and can withstand the rigors of continuous use.

In conclusion, the Swisher LS422X is designed with the modern user in mind, combining power, versatility, and safety features into one highly efficient log splitter. Whether you are a homeowner in need of firewood for the winter or a professional looking for a reliable machine, the LS422X stands out as a top choice in the wood processing industry.