Troubleshooting, Making Connections | XtremeMac XGC-1e manual

Troubleshooting

If you are having problems with this unit, refer to these troubleshooting hints. Also, refer to the connection diagram to ensure your devices are connected properly.

	Problem	Suggested Action

	• I have no lights and no function at all.	Check the fuse and main power. Replace the fuse if required with the correct rated fuse.
		Check the equipment connected to the XGC for problems and/or short circuits.

	• The fuse continues to blow.	If the fuse blows repeatedly, verify the devices connected to the unit are working properly
		and that they are not too large for the XGC-1e to safely control.
		You may need to consider using expansion modules, (UPM / HPR / MLC) to decrease the
		amperage (load) on the XGC fuse.

	• The fans are running so often, the CO2	You may have too much heat building up in your area or too small of an exhaust fan.
	is hardly ever ON.	Reduce the heat sources or increase your fan size.
		You may also consider using a “closed-loop” air conditioner to keep the temperature and
		humidity below the set points so that CO2 is allowed to run for longer amounts of time.

	• My CO2 consumption seems to be	Make sure your area is sealed. You may want to install a motorized damper to seal your
	quite high.	exhaust fans when they are “OFF”.

	• The Hydro pumps are not cycling	The Hydro pump outlets can be operated 24-hours a day or only when the “Lights” are “ON”.
	properly.
	properly.	The “Hydro” selector switch also has a center “OFF” position, which can be used to “reset” the

		timing function. Make sure the switch is not turned “OFF”.

	• The CO2 outlet is pulsing ON and OFF	If you are running a CO2 generator, you may want to change to ON / OFF control.
	too often.	If running compressed CO2 you may want to try running an Auto tune.
	• After my compressed bottle or LP tank	If your CO2 tank runs out for a period of time, the controller may take anywhere from a few hours
	was replaced, the level fluctuates.	to a couple of days to re-stabilize, this is normal. When the tank ran out, the PPM-2a tried to
		compensate by changing its internal settings.

	• My CO2 outlet never comes on.	Make sure the CO2 disable function is not ON.
		If the actual CO2 level is above the set point (SV) the outlet will not turn on. Allow the level to
		drop or raise the (SV).

Making Connections

All of the main functions controlled by the XGC are accessed using (8) standard 120 VAC, 15-amp receptacles mounted on the sides of the enclosure. This allows you to simply “plug in” any standard device without hardwiring or hassles. Printed labels on the front face of the enclosure identify the receptacles.

We highly recommend using only 3-wire devices with a ground. Suitably double-insulated devices are acceptable. Keep in mind that the combined amperage draw on all of the devices connected to the XGC-1e must be less than 15-amps @ 120 VAC.

XGC-1e specifications

The XtremeMac XGC-1e is a compact, powerful accessory designed for iPhone and iPod users who seek a seamless, high-quality audio experience. This innovative device stands out for its unique blend of modern technology and user-friendly design, making it an essential addition to the digital lifestyle of any gadget enthusiast.

One of the key features of the XGC-1e is its robust connectivity options. It integrates advanced Bluetooth technology, allowing for wireless audio streaming from devices within a considerable range. This feature eliminates the need for cumbersome cables, providing users with the freedom to move around while enjoying their favorite tunes. The device supports a wide array of audio codecs, ensuring high-fidelity sound that caters to audiophiles and casual listeners alike.

The XGC-1e is also equipped with a built-in rechargeable battery, providing users with hours of uninterrupted playback. The efficiency of this battery ensures that users can enjoy their music throughout the day, making it perfect for travel or outdoor use. Additionally, the device features a quick charge capability, allowing users to power up the battery in a matter of minutes when time is of the essence.

Another standout characteristic of the XtremeMac XGC-1e is its sleek and portable design. The device is lightweight and compact, making it easy to carry in a bag or purse. Its stylish aesthetic complements today's modern devices, ensuring that it not only performs well but also looks good doing it.

Moreover, the XGC-1e incorporates an intuitive user interface, making it easy to navigate through tracks and adjust volume levels. The tactile buttons are responsive and straightforward, allowing for quick adjustments without fumbling around. Furthermore, the device is compatible with a range of other XtremeMac accessories, creating a holistic ecosystem for consumers.

In terms of durability, the XGC-1e is built with high-quality materials designed to withstand the rigors of daily use. This resilience enhances its longevity, making it a wise investment for anyone who values performance and quality.

Overall, the XtremeMac XGC-1e is more than just an accessory; it is a gateway to an enhanced audio experience. With its blend of cutting-edge technology, user-centric design, and high build quality, it offers an unmatched combination of features that appeal to a wide audience, from casual listeners to serious music aficionados.