XtremeMac XGC-1e warranty Calibration, Changing to on / OFF control mode

Page 8

Fuzzy Logic™ CO2 Control (Continued)

Changing Control Modes (Continued)

Changing to ON / OFF control mode

1)Press and hold the (SEL) pushbutton for three seconds. (P will be displayed)

2)Press the (SEL) button momentarily. (The current proportional band setting will be displayed = 5.0)

3)Using the (Down) pushbutton, change the display to read (0.0)

4)Momentarily press the (SEL) button to accept the change.

5)Allow the unit to re-start by not touching any of the buttons for approximately 30 seconds.

Changing to “Fuzzy Logic” control mode

1)Press and hold the (SEL) pushbutton for three seconds. (P will be displayed)

2)Press the (SEL) button momentarily. (The current proportional band setting will be displayed = 0.0)

3)Using the (Down) pushbutton, change the display to read (5.0)

4)Momentarily press the (SEL) button to accept the change.

5)Allow the unit to re-start by not touching any of the buttons for approximately 30 seconds.

*Note: There are several other “hidden” internal parameters that are normally locked-out from the user. These setting are critical in order for the unit to function properly. DO NOT change any of these settings! If you mistakenly access these “weird” numbers reset the unit. To reset the unit, unplug the main power cord for 20 seconds and re-connect.

Calibration

The XGC-1e is factory calibrated. The sensor onboard the XGC-1e is capable of remaining in calibration for a minimum of three years. Extreme shock during shipping and other factors may affect the calibration. To check the calibration, follow the procedure below.

Supplying the unit with outside air can quickly verify the calibration. The reading outdoors should be around 250-550PPM. If the XGC-1e calibration is incorrect, the unit can be returned to the manufacturer. Please note:

•The XGC-1e CO2 sensor has built-in temperature compensation that automatically corrects the reading depending on the ambient temperature. However, extreme temperatures of below 20°F or above 120°F may affect the reading.

•Checking calibration in urban areas usually results in higher ambient CO2 readings due to car exhaust and human activity.

To check calibration:

1)Bring the unit outside so that it will receive fresh air. Do not locate the unit in direct sunlight.

2)Plug the power supply and power cord into 120vac.

3)Move away from the controller to allow the reading to stabilize for approximately 20 minutes.

4)Check the CO2 level.

*Important: Do not breathe while checking the calibration the unit. As you exhale, large concentrations of CO2 are expelled from your lungs. This higher level of CO2 will affect the calibration of the unit. Try to hold your breath!

5)If the level is between 250 and 550 the unit is performing fine. If it is outside that range, allow the unit to stabilize longer.

6)If the calibration is still off, the unit can be returned to the factory for re-certification.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Protection & Safety WarrantyInstallation / Start-Up Word To The WiseFront Panel OverviewStart-Up Procedure How To Start-Up The XGCControls Timers Adjustable Recycling TimersHydroponic Pump Timers Hour, TimeclockAuto-Tuning CO2 Fuzzy Logic CO2 ControlSupplemental CO2 Fuzzy Logic CO2 ControlChanging Control Modes How To Perform Auto-TuningChanging The Setpoint SV Changing to on / OFF control mode CalibrationUniversal Power Module Upm-1 High Power Relay Hpr-1Options Master Lighting Controller MlcsTroubleshooting Making ConnectionsMaintenance / Specifications PrecautionsSpecifications Maintenance

XGC-1e specifications

The XtremeMac XGC-1e is a compact, powerful accessory designed for iPhone and iPod users who seek a seamless, high-quality audio experience. This innovative device stands out for its unique blend of modern technology and user-friendly design, making it an essential addition to the digital lifestyle of any gadget enthusiast.

One of the key features of the XGC-1e is its robust connectivity options. It integrates advanced Bluetooth technology, allowing for wireless audio streaming from devices within a considerable range. This feature eliminates the need for cumbersome cables, providing users with the freedom to move around while enjoying their favorite tunes. The device supports a wide array of audio codecs, ensuring high-fidelity sound that caters to audiophiles and casual listeners alike.

The XGC-1e is also equipped with a built-in rechargeable battery, providing users with hours of uninterrupted playback. The efficiency of this battery ensures that users can enjoy their music throughout the day, making it perfect for travel or outdoor use. Additionally, the device features a quick charge capability, allowing users to power up the battery in a matter of minutes when time is of the essence.

Another standout characteristic of the XtremeMac XGC-1e is its sleek and portable design. The device is lightweight and compact, making it easy to carry in a bag or purse. Its stylish aesthetic complements today's modern devices, ensuring that it not only performs well but also looks good doing it.

Moreover, the XGC-1e incorporates an intuitive user interface, making it easy to navigate through tracks and adjust volume levels. The tactile buttons are responsive and straightforward, allowing for quick adjustments without fumbling around. Furthermore, the device is compatible with a range of other XtremeMac accessories, creating a holistic ecosystem for consumers.

In terms of durability, the XGC-1e is built with high-quality materials designed to withstand the rigors of daily use. This resilience enhances its longevity, making it a wise investment for anyone who values performance and quality.

Overall, the XtremeMac XGC-1e is more than just an accessory; it is a gateway to an enhanced audio experience. With its blend of cutting-edge technology, user-centric design, and high build quality, it offers an unmatched combination of features that appeal to a wide audience, from casual listeners to serious music aficionados.
Top Page Image Contents