Xantrex Technology 300 manual

Page 17

Caution! Risk of damage to the 300 Inverter.

Reversing the positive and negative battery cables will damage the inverter and void your warranty.

When you connect the inverter to the battery, double check the connections. The red wire must be connected to the red (+) terminal on the inverter and the positive (+) terminal on the battery. The black wire must be connected to the black (–) terminal on the inverter and the negative (–) terminal on the battery.

Caution! Fire hazard.

The wires in most 12 volt sockets or power outlets are not large enough for loads greater than 150 watts: they will overheat and present a fire hazard.

For loads greater than 150 watts, connect the inverter directly to the battery and use appropriately sized wires like those in the battery clip wire assembly provided with the inverter.

To connect the inverter:

1.Remove the nuts from the DC terminals on the inverter.

2.Place the red ring connector on the red (positive +) DC terminal, and then screw the red nut on until it is snug. Do not over tighten.

3.Attach the red clip to the red (positive +) battery terminal.

4.Attach the black clip to the black (negative –) battery terminal.

12

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Owner’s Guide Xantrex InverterDate and Revision Page Contents Page Introduction Important Safety Information Page Page AC Panel on the 300 Inverter European AC Outlet Xantrex 300 Inverter FeaturesPage European AC AC OutletsFastening the Inverter to a Mounting Surface Connecting the 300 InverterChoosing a Location DC Panel on the 300 Inverter Connecting the 300 Inverter to DC PowerUsing the Cigarette Plug Wire Assembly Using the Battery Clip Wire Assembly Page Use a qualified installer to perform a hardwired connection Hardwiring the 300 Inverter to a 12 Volt Battery Page Page Replacing the In-Line Fuse Disconnecting the BatteryOperating the 300 Inverter Page Interference With Electronic Equipment Battery Operating Time AC load will not operate the red light is on TroubleshootingPossible cause AC load will not operate no inverter lights are on Measured inverter output voltage is too low Warranty Information Returning a Product Out-of-Warranty Service Page Electrical SpecificationsRegulatory Physical
Related manuals
Manual 61 pages 35.45 Kb

300 specifications

Xantrex Technology is known for its innovative power solutions, and the Xantrex Technology 300 is no exception. This compact and efficient inverter is designed to provide reliable power for various applications, particularly in off-grid settings. With a focus on performance and versatility, the Xantrex 300 is an excellent choice for recreational vehicles, boats, and remote power systems.

One of the main features of the Xantrex Technology 300 is its ability to convert 12V DC power into 120V AC power, allowing users to run standard household appliances. This capability makes it ideal for camping trips and outdoor excursions where access to grid power is limited. The inverter delivers up to 300 watts of continuous power, making it suitable for devices such as small refrigerators, lights, and power tools.

The Xantrex 300 is equipped with advanced technologies that enhance its performance and safety. One of these technologies is the patented Pure Sine Wave output, which provides clean and stable power. This feature ensures that sensitive electronics, such as laptops and smartphones, can be charged and used without the risk of damage. The inverter also includes built-in safety features, including overload protection, short-circuit protection, and thermal shutdown, which help safeguard both the inverter and the connected devices.

Another notable characteristic of the Xantrex 300 is its compact design. Weighing less than 5 pounds, this inverter is lightweight and easy to transport, making it an excellent addition to any outdoor adventure. Its portable nature does not compromise its performance, as it can effortlessly handle various loads while maintaining efficiency.

Moreover, the inverter has a user-friendly interface, featuring LED indicators that provide real-time information about power output and battery status. This allows users to monitor their power consumption and battery levels easily.

In summary, the Xantrex Technology 300 stands out for its combination of power capacity, advanced technologies, and portability. With its pure sine wave output, robust safety features, and lightweight design, it meets the demands of users seeking reliable off-grid power solutions while ensuring the safety of their sensitive devices. Whether for recreational use or as part of a larger off-grid system, the Xantrex 300 is a valuable asset for anyone in need of portable power.
Top Page Image Contents