Xantrex Technology 300 manual

Page 24

that occurs when the engine starts may trigger a low voltage shutdown.

AC Overload Shutdown If you connect an AC load rated higher than 300 watts or 1.3 amps or that draws excessive surge power, the 300 Inverter shuts down.

The PWR light stays on, and the light comes on to indicate that the inverter is overloaded.

Note: High startup surge requirements The power, or “wattage” rating of an AC load is the average amount of power it uses. When they are first turned on, many AC loads consume more power than their continuous power rating. TVs, monitors, and electric motors are examples of loads that have high surge requirements at start up. Although the 300 Inverter can supply momentary surge power to 600 watts, some products rated less than 300 watts can exceed its surge capabilities and trigger the AC overload shutdown feature. (See page 22 for troubleshooting procedures.)

High Battery Voltage Shutdown If a defective battery charging system causes the battery voltage to rise to dangerously high levels, the inverter shuts down automatically. The PWR light stays on, and the light comes on.

High Temperature Shutdown If the inverter exceeds its safe operating temperature because of insufficient ventilation or a high-temperature environment, it sounds an alarm and shuts down automatically. The PWR

light stays on, and the light comes on. When the inverter has cooled sufficiently, it restarts automatically.

19

Image 24
Contents Xantrex Inverter Owner’s GuideDate and Revision Page Contents Page Introduction Important Safety Information Page Page Xantrex 300 Inverter Features AC Panel on the 300 Inverter European AC OutletPage AC Outlets European ACConnecting the 300 Inverter Choosing a LocationFastening the Inverter to a Mounting Surface Connecting the 300 Inverter to DC Power DC Panel on the 300 InverterUsing the Cigarette Plug Wire Assembly Using the Battery Clip Wire Assembly Page Use a qualified installer to perform a hardwired connection Hardwiring the 300 Inverter to a 12 Volt Battery Page Page Disconnecting the Battery Replacing the In-Line FuseOperating the 300 Inverter Page Interference With Electronic Equipment Battery Operating Time Troubleshooting AC load will not operate the red light is onPossible cause AC load will not operate no inverter lights are on Measured inverter output voltage is too low Warranty Information Returning a Product Out-of-Warranty Service Page Specifications ElectricalPhysical Regulatory
Related manuals
Manual 61 pages 35.45 Kb

300 specifications

Xantrex Technology is known for its innovative power solutions, and the Xantrex Technology 300 is no exception. This compact and efficient inverter is designed to provide reliable power for various applications, particularly in off-grid settings. With a focus on performance and versatility, the Xantrex 300 is an excellent choice for recreational vehicles, boats, and remote power systems.

One of the main features of the Xantrex Technology 300 is its ability to convert 12V DC power into 120V AC power, allowing users to run standard household appliances. This capability makes it ideal for camping trips and outdoor excursions where access to grid power is limited. The inverter delivers up to 300 watts of continuous power, making it suitable for devices such as small refrigerators, lights, and power tools.

The Xantrex 300 is equipped with advanced technologies that enhance its performance and safety. One of these technologies is the patented Pure Sine Wave output, which provides clean and stable power. This feature ensures that sensitive electronics, such as laptops and smartphones, can be charged and used without the risk of damage. The inverter also includes built-in safety features, including overload protection, short-circuit protection, and thermal shutdown, which help safeguard both the inverter and the connected devices.

Another notable characteristic of the Xantrex 300 is its compact design. Weighing less than 5 pounds, this inverter is lightweight and easy to transport, making it an excellent addition to any outdoor adventure. Its portable nature does not compromise its performance, as it can effortlessly handle various loads while maintaining efficiency.

Moreover, the inverter has a user-friendly interface, featuring LED indicators that provide real-time information about power output and battery status. This allows users to monitor their power consumption and battery levels easily.

In summary, the Xantrex Technology 300 stands out for its combination of power capacity, advanced technologies, and portability. With its pure sine wave output, robust safety features, and lightweight design, it meets the demands of users seeking reliable off-grid power solutions while ensuring the safety of their sensitive devices. Whether for recreational use or as part of a larger off-grid system, the Xantrex 300 is a valuable asset for anyone in need of portable power.