Powering 115-volt AC Products | Xantrex Technology 1500 manual

Powering 115-volt AC Products

XPower 1500 is capable of powering most 115-volt AC products and equipment that use 1350 watts or less. Its AC output waveform, called a “quasi-sine wave” or “modified sine wave”, is designed to function similarly to the sine wave shape of utility power.

CAUTION: Equipment damage

Do not use XPower 1500 with the following equipment:

•Small battery operated products such as rechargeable flashlights, some rechargeable shavers, and night-lights that are plugged directly into an AC receptacle to recharge.

•Certain battery chargers for battery packs used in hand power tools. These chargers sometimes have a warning label stating that dangerous voltages are present at the charger’s battery terminals. Check with the manufacturer of the power tool to verify whether the battery charger supplied with the tool should be used with XPower 1500.

The power, or “wattage”, rating of AC products is the power they use. During the first moments after they are switched on, many products such as power tools or pumps, consume much more power than their average rating. Although XPower 1500 can supply momentary surge power greater than 1350 watts, some products may exceed its capabilities and trigger the inverter’s safety overload shutdown circuit. See “Automatic Protection: Overload, Overheating, and Low Battery” in this section for the reset procedure. If this problem occurs when attempting to operate several products at the same time, try first switching on the AC Outlets with all products switched off, then one by one switch each on, starting with the high surge product first.

Connecting Your AC Products

The following steps assume you have fully charged XPower 1500’s battery pack. See “Recharging XPower 1500” on page 2–16.

1.Turn on the AC Outlets Switch located on the AC Power Panel. The green POWER light illuminates to confirm AC power is now on and available at the two AC Outlets. See Figure 2-1, “AC Power Panel” on page 2–5.

2.Plug the AC product you wish to operate into one of the two AC outlets and switch the product on. The product should operate normally, just as it would if plugged into a wall outlet at home.

445-0127-01-01

2–9

1500 specifications

Xantrex Technology is a well-regarded name in the field of power conversion solutions, particularly known for its advanced inverter and charger systems for various applications, including recreational vehicles, marine, and mobile power systems. Three of their popular models are the Xantrex inverter series: the 800, 1500, and 1750. Each model is designed to provide reliable, efficient power in a compact form factor, catering to different power needs.

The Xantrex 800 inverter delivers 800 watts of continuous power, making it suitable for smaller applications such as charging electronic devices, powering lights, or running small appliances. It combines a sine wave output with high-efficiency technology to ensure compatibility with sensitive electronics. One of its main features is an easy-to-use interface, typically including LED indicators, that allows users to monitor power status at a glance.

The Xantrex 1500 inverter ups the ante by offering 1500 watts of continuous power. It is particularly well-suited for larger loads, such as microwave ovens or small refrigerators. This model incorporates advanced power management technology, ensuring better load handling and energy efficiency. The built-in safety features, including over-voltage and over-temperature protection, enhance the reliability of this inverter for longer-term applications.

The Xantrex 1750 inverter is the most powerful among the three, delivering 1750 watts of continuous output. This model is ideal for users who require robust power supply capabilities, such as on extended camping trips or in off-grid scenarios. It features a user-friendly interface with digital displays that provide detailed information on power usage, battery status, and operational conditions. This inverter is designed with advanced technology to maximize efficiency and minimize power loss during operation.

All three models utilize pure sine wave technology, which is crucial for ensuring the safe operation of sensitive electronics. They also include features such as automatic shutdown in the event of excessive heating or other anomalies, ensuring protection for both the inverter and the devices connected to it. Additionally, compact and lightweight design makes these inverters easy to install and transport, making them ideal for a variety of mobile and stationary applications. Whether you require minimal power for small devices or a more robust system for larger loads, Xantrex Technology offers versatile inverter options to meet diverse needs.