Xantrex Technology 1500 manual Obtaining a Battery Replacement

Page 35

WARNING: Personal injury

To avoid potentially serious injury, follow these precautions when working with batteries:

•Someone should be within range of your voice or close enough to come to your aid when you work near a lead-acid battery.

•Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.

•Wear complete eye protection and clothing protection. Avoid touching your eyes while working near batteries.

•If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters your eye. immediately flood it with running cold water for at least twenty minutes and get medical attention.

•Keep a supply of baking soda on hand in the area of the batteries. Baking soda neutralizes lead-acid battery electrolyte.

•NEVER smoke or allow a spark or flame in vicinity of the engine or batteries.

•Be extra cautious to reduce the risk of dropping a metal tool on the battery. It might spark or short-circuit the battery or other electrical parts that may cause an explosion.

•Remove personal metal items such as rings, bracelets, necklaces, and watches when working with a lead-acid battery. When a short circuit if created, a lead- acid battery can produces a current high enough to weld a ring or the like to metal, causing a severe burn.

Obtaining a Battery Replacement

The internal battery pack in your XPower 1500 is either version A or version B as described below:

(A)Three separate 17 amp-hour batteries, each with a positive and negative terminal visible, connected in parallel with cables.

or

(B)A single 51 amp-hour battery pack with only one positive and one negative terminal showing. There are different options for battery replacement depending on which battery pack version is in your XPower 1500.

If your XPower 1500 has version A, replace the three existing batteries with three new, sealed, lead acid, AGM type batteries. In addition to the factory installed 17 amp-hour batteries, you may also use other approved batteries as listed below. These batteries are available in most areas from stores that specialize in higher amperage, deep cycle batteries.

2–24

445-0127-01-01

Page 34 Page 36
Image 35
Page 34 Page 36
Contents XPower 1500 Portable Household Power Owner’s Guide XPower 1500 Portable Household PowerDate and Revision Important Safety Instructions Safety Precautions for Using Rechargeable AppliancesContents Specifications TroubleshootingTopics Covered in the Guide Introduction1Features and Accessories Features and AccessoriesAssembling the Handle 2below shows how to assemble the handle and attach it toPage Operation Power Ratings and Battery Life Operating 115-volt AC Products XPower 1500 Basic OperationOperating 12-volt DC Accessories Using XPower 1500 to Jump-Start Your Vehicle Recharging XPowerAC Power Panel Indicators, Controls, and Connection Points2Battery level Indicator 3DC Power Panel 4High Power 12-volt DC Terminals Connecting Your AC Products Powering 115-volt AC ProductsAutomatic Protection Overload, Overheating, and Low Battery AC Powered Products Watts Hours Battery Operating TimesConnecting 12-volt DC Accessories Powering 12-volt DC AccessoriesDC Powered Products Watts Hours Vehicle or Boat Engine Starting Jump-starting Directly to the BatteryJump-starting via a Vehicle’s Lighter Plug Socket Charging Options Recharging XPowerBattery Self-discharge and Shelf Life Recharging with the AC Charger Recharging from your Vehicle Recharging with a Solar Panel Recharging with a Generator’s 12-volt DC Power OutletPreparing the Cables Connecting to an External BatteryExtended Operating Time Connecting the Cables 445-0127-01-01 Replacing XPower 1500’s Internal Battery Pack Battery ReplacementObtaining a Battery Replacement Battery Replacement Page Television Interference TroubleshootingCommon Problems Buzzing Sound in Audio Systems1Troubleshooting Reference Troubleshooting ReferenceVolt AC Section SpecificationsVolt DC Section Mechanical Charging SystemWarranty Warranty and Return InformationProduct DisclaimerExclusions Return Material Authorization PolicyReturn Procedure Information About Your System Out of Warranty Service
Related manuals
Manual 2 pages 49.95 Kb

1500 specifications

Xantrex Technology is a well-regarded name in the field of power conversion solutions, particularly known for its advanced inverter and charger systems for various applications, including recreational vehicles, marine, and mobile power systems. Three of their popular models are the Xantrex inverter series: the 800, 1500, and 1750. Each model is designed to provide reliable, efficient power in a compact form factor, catering to different power needs.

The Xantrex 800 inverter delivers 800 watts of continuous power, making it suitable for smaller applications such as charging electronic devices, powering lights, or running small appliances. It combines a sine wave output with high-efficiency technology to ensure compatibility with sensitive electronics. One of its main features is an easy-to-use interface, typically including LED indicators, that allows users to monitor power status at a glance.

The Xantrex 1500 inverter ups the ante by offering 1500 watts of continuous power. It is particularly well-suited for larger loads, such as microwave ovens or small refrigerators. This model incorporates advanced power management technology, ensuring better load handling and energy efficiency. The built-in safety features, including over-voltage and over-temperature protection, enhance the reliability of this inverter for longer-term applications.

The Xantrex 1750 inverter is the most powerful among the three, delivering 1750 watts of continuous output. This model is ideal for users who require robust power supply capabilities, such as on extended camping trips or in off-grid scenarios. It features a user-friendly interface with digital displays that provide detailed information on power usage, battery status, and operational conditions. This inverter is designed with advanced technology to maximize efficiency and minimize power loss during operation.

All three models utilize pure sine wave technology, which is crucial for ensuring the safe operation of sensitive electronics. They also include features such as automatic shutdown in the event of excessive heating or other anomalies, ensuring protection for both the inverter and the devices connected to it. Additionally, compact and lightweight design makes these inverters easy to install and transport, making them ideal for a variety of mobile and stationary applications. Whether you require minimal power for small devices or a more robust system for larger loads, Xantrex Technology offers versatile inverter options to meet diverse needs.
Top Page Image Contents