Wright Manufacturing 98320009, 98320010, 98320008, 98320007 owner manual General Safety

Page 4

This is the safety alert symbol. It is used throughout this manual and on the owner’s safety labels to alert you to potential personal injury hazards. Read these instructions carefully. It is essential that you read the instructions and safety precautions before you attempt to work on or use this unit. Obey all safety messages that follow to avoid possible destruction of

. property, injury or death

General Safety

•Become familiar with the Wright Z and it’s Owner’s Manual. It is necessary to understand how to shut down the PTO system and be familiar with the mower controls.

•Read the mower Owner’s Manual and this manual completely.

•Identify and obey all safety warning decals. If any decals are missing, replace with new.

•Only allow well-trained adults age 18 or older to operate equipment.

•Wear appropriate eye and ear protection with properly fitting protective clothing.

•Use caution with rotating blades and blower. ALWAYS wait at least one-minute after turning off Blade-Clutch and engine before installing, adjusting, servicing or removing grass collection system.

•DANGER, Risk of thrown objects from mower blades and blower traveling at high speeds. NEVER operate mower with exposed mower deck or blower discharge.

•Check transfer hose connection point at blower and receptacle frame. NEVER run blower without transfer hose firmly connected to blower housing and bag receptacle housing.

•ALWAYS check mounting hardware. Grass Collection system should be firmly mounted the mower at all times during operation. DO NOT operate if any hardware is missing or loose.

•Always keep shields and guards in place. Removal of protective shields can risk serious injury or death during operation.

•If grass collection system is removed from mower, reinstall mower chute deflector BE- FORE continued operation.

•Transfer hose and grass collection bags are subject to wear and MUST be replaced when torn, cracked, or unable to effectively channel discharge materials.

•Extreme CAUTION should be used on hills. The grass collection system will raise the mower’s center of gravity and increase the risk of tipping or rollover.

Removing an Obstruction

1Turn off blade clutch PTO using Mower Controls.

2Set the motion controls to neutral and set the parking brake.

3Turn off engine and remove starter key.

4Disconnect hose from blower and use a piece of wood to rotate propeller in reverse. It may be necessary to disconnect the blower belt to effectively turn impeller and dislodge the obstruction. DO NOT insert hands or fingers into the blower housing, the propeller may spin once the obstruction is dislodged.

Mower Stability

The Wright Z was designed to maintain stability using this grass collection system. However, it is still necessary that the proper precautions be taken to ensure operator safety and stability.

•Adjust the rear wheel motor supports to be furthest from the mower deck. This is achieved by removing the wheels and unbolting the four mounting bolts for the wheel motor supports. Moving the motor supports to the back of the frame will improve the overall balance and stability of the machine. This eliminates the need to add weights to the front of the machine.

•Travel at a reasonable speed when traversing uneven, loose or sloped ground

•Keep collection levels low when mowing on hills by emptying the bags frequently. This will increase the stability of the mower.

•If the mower is unable to mow in a straight line across the slope of a hill, the grade of the hill is too steep. Always start at the bottom of a hill to check this before proceeding further up the hill.

•Use extreme caution in mowing near streams, rivers and ponds. Maintain a distance of at least ten (10) feet at all times. The remainder should be cut with a walk-behind mower or trimmer.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Grass Collection System Limited Warranty Table of Contents General Safety Safety Decals Deck Preparation and Pulley Installation Before You BeginMounting the Blower to the Deck Blower InstallationCheck for Belt Interference Install New Deck Cover For 48 Mower DeckFor 52 Mower Deck For 61 Mower DeckRear Collection System Installation Attach Muffler Tail Pipe and ClampBolt on Grass Collection Receptacle Frame Move the Rear Motor SupportsOptional Deck Counter-Weight Kit Transfer Tube InstallationMount Collection Hood Frame to Mower Frame and Assemble Before You Begin… OperationTransport StoragePage Page Grass Collection System Parts List Page Blower Parts List Page BAG Catcher Parts List BAG Catcher Part Number Description QTY BAG Catcher 4600X Wedgewood Blvd Frederick, MD

98320009, 98320008, 98320007, 98320010 specifications

Wright Manufacturing is renowned for its innovation in the lawn care and landscaping equipment industry. Among its noteworthy offerings are models 98320010, 98320007, 98320008, and 98320009, which showcase the company’s commitment to quality and performance.

One of the standout features across these models is the advanced cutting technology. Wright Manufacturing utilizes a unique deck design that ensures a clean and precise cut, regardless of the grass type or terrain. This technology allows for superior mulching and bagging capabilities, catering to various lawn care needs. The cutting height is easily adjustable, providing users with the flexibility to maintain their lawns at desired levels without the need for complex adjustments.

Durability is another hallmark of these models. Built with high-grade materials, the frames are designed to withstand the rigors of professional usage while maintaining a lightweight profile. This combination of durability and weight leads to easy maneuverability, making these models ideal for both residential and commercial applications.

Ergonomics play a vital role in the design of Wright Manufacturing’s equipment. These mowers feature comfortable grips, adjustable seating, and user-friendly controls, allowing operators to work for extended periods without fatigue. Additionally, the intuitive control panel ensures that even novice users can quickly learn to operate the machines effectively.

Gas efficiency is prioritized in the design of these models, with engines optimized for performance and fuel consumption. This efficiency not only reduces operating costs but also minimizes environmental impact, aligning with growing sustainability concerns among consumers.

Safety features, such as automatic shut-off systems and easily accessible emergency controls, are integrated into the design, ensuring a secure experience for operators. Wright Manufacturing’s commitment to safety reinforces its reputation as a trusted brand in the landscaping community.

In summary, models 98320010, 98320007, 98320008, and 98320009 from Wright Manufacturing represent the pinnacle of lawn care technology. With their advanced cutting capabilities, durable construction, ergonomic design, fuel efficiency, and robust safety features, these machines are engineered to meet the demands of both professional landscapers and homeowners alike, solidifying Wright Manufacturing’s position as a leader in the industry.
Top Page Image Contents